Search results for query: *

...278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS DATE TIME ALP NOIF UNIT EQU INF1 08JAN10 09:25:36 2 2 CLOP 001-*-**-** 2 CLASS: 2 344 CIL, FAULTY CONNECTION TO NIU PORT DATE TIME ALP NOIF EQU BRDID INF1 08JAN10 09:24:02 1 1...

good day, I ever my TeleAudit program does not run as it is supposed to be,can I reinstall its driver? thanks

Hi All, Can somebody teach me on how to reset this fault? "CIL,Faulty connection to nui port". Thanks

the destination address of the packet request is the ip address of the elu32 board.

I already changed the status from passive to active.

how can I change the status of the service state from passive to active?...

how will I do wireshark trace?

I have connected the IP Phone directly to the IP Network,still the Phone wont update...

...the phone. Configuration file [System] System=BP-R15 OverLap=YES RRQTtl=600 GatekeeperDiscovery=NO AdminPasswd=RbdbSdc9c [Software] HardwareRev=P1* BootFile=/dbc42201/d4-boot_R3D.dat BootVersion=R3D ApplicationFile=/dbc42201/d4-applic_R3H.dat ApplicationVersion=R3H [AutoNeg] AutoNeg=YES...

...501 04 (both MD110 and MX-ONE Telephony Switch) ;System=MD-E ;System=MX-ONE ; For MX-ONE Telephony Server OverLap=YES RRQTtl=600 GatekeeperID=LIM* ;Domain=ebc.ericsson.se ;PrimaryGKAddress=192.168.0.1 ;SecondaryGKAddress=192.168.0.1 GatekeeperDiscovery=YES AdminPasswd=RbdbSdc9c...

this is the config file. every time i reboot the phone, it wont update...http://localhost/dbc44x01/d4-config.txt

I can view the configuration file thru the web address http://localhost/dbc44x01/d4-config.txt. I used a straight thru cable in tandem with the IP Phone. I assigned the the PC's IP address as the SW server address of the IP phone. Still the IP phone wont update.

I have set-up the BMS server, but the IP Phone cannot detect the SW SErver,which is in tandem with the IP Phone.What seems to be the problem?..

Can I load the new configuration file directly to the phone?...

Thanks!! We have an IP network here, and I have a BMS Software.Where will I load it?will I load it in our server?What web server will I be needing? mheroy

Hi All, I am installing a dialog 4422 IP Phone in a MD110 BC12/SP6. I got two(2) ELU Boards, 10 IP-extension licences, 3 VOIP-ETH-Interface.the Dialog 4422 is configured to BP-R15,how can I configure it to MD110?Any helpful configuration notes on how to initiate hte installation? thanks in...

I will try to initiate the board, i got two ELU32 in the cabinet. mheroy

/Daddy, I tried what you said and i got this reply: <IPBOP:BPOS=ALL; NOT ACCEPTED BPOS NOT FOUND mheroy

/daddy, i got an DBC 422 01.

Hi, how can I check if my IP Phone is DBC 422 01 or DBC 422 02?