Hi MD experts!
Perhaps question is simply but I have no experience with this topic.
Will MD110, which was working in USA, work in Poland? Are there difference, which make it impossible ?
antek
Hi !
Is it possible that DNA is able to use external, other vendor LDAP server to read list of contacts ?
I have found out that only OWS is able to do it.
Dear MD experts!
I have found out that using VSU2 in MD110 I can get Automated Attendant feature. It means that a customer listens to the Voice Answer like "Welcom in Ericsson" and then he can dial the desired extension number.
Normally in MD110 - BC10 I can listen to the Voice Answer and then...
I have question.How can adjust ringing signal diffrent for internal and diffrent for external calls.I adjusted in aspac
ASPAC:PARNUM=1,PARVAL=2; but I don't hear diffrent in ringing signal cadence.
Dear Mr. Johnpoole
I am very thanks for you kindly support.
If you mean by this (you may need to turn on qsig between the two) to open Qsig between the two MD we already open it and if we replace Meridian by MD for test every thing will working well ,also notes that when we dial any analogy...
hi john poole
Sorry I don’t understand and I don’t have experience with Meridian but I have some at Md110, generally I need Full parameter to connect Meridian option 61 with Ericsson MD110 by E1 as network.
Rout from MD110 to Meridian configured as the following
ROCAI: ROU=72,SEL=...
Hi
We have 3 PBX connecting together by ISDN Qsig, one Meridian option 61 and two Ericsson MD110, one from this MD110 is transit Exchange our problem is when we make a call from MD110 (not transit) to Meridian we can see the caller ID at our extension (this call come troughs the transit...
This cable are needed for duplicating ring-Signals to other magazines in which there are PU4DC. In my Alex library there are only PU5DC. I don't know if PU4DC and PU5DC are the same from this point of view.
Hi MD experts!
I can't find in my documentation how to distribute RING SIGNAL from REU board in one magazine to other magazines in the same LIM. Somebody told me that I need cables between PU4DCs in all magazines.
Is it true? What kind of TSR ... cable do I need? What connectors in PU4DC...
Hi MD specialist!
I need some information about ELU32.
How many IP-terminals I can connect to ELU32?
How many ELU32 boards I need for 100 ip-terminals users?
If someone can - give me some information about ELU32.
What diffrent is between ELU32 ROF 1375416/2 and ROF 1375428/1?What is capacity...
Hi MD experts!
There is a NLOG key programmed on digital phone. An incoming call can be registered in system.
Problem is that caller ID is registered without prefixes (to seize trunks and to make long distance call).
Where can I set-up DEST, prefix to long distance calls and other codes (like...
Hi,
HDU2 has a plug on front which looks like input power plug. Does it mean that can I put HDU2 outside of backplane MD110 (for example on a table :o) ) and connect to IPU using SCSI cable and to PU4DC using power cable ?
antek
Does it mean that I can (using suitable commands) disconnect IPU from PC Soft Disk and connect to HDU 2,5,6,7/2 ?
By the way:
HDU2 has a plug on front which looks like input power plug. Does it mean that I can put HDU2 outside of backplane MD110 (for example on a table :o) )and connect to IPU...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.