We have a problem that we believe to be related to LAN diameter - number of hops and cable length...
It seems that broadcasts aren't "behaving" between the farthest edges of the LAN.
I'm reading the CCDA Exam guide and it talks about collision domains and limitations pertaining to...
Hi,
I'm in for the remote access exam tomorrow and was wondering if anyone has any useful tips??
I've studied, practiced and done some Boson exams, just looking for some last minute inspiration I guess....
Cheers,
Yoggit
I've just done the Routing and Switching exams and am pondering over what to study next - remote access or troubleshooting.
Any suggestions from ppl that may have been here before?
Thanks,
Yoggit
Thank, tried all that, but SolarWinds doesn't like some switches!!
This is from the online help: "...we have found that many Cisco Catalyst switches do not support the writeNet MIB and will not work with Config Uploader."
Any other ideas??
Thanks
Does anybody know of a way to reset passwords on a Catalyst 2900 using SNMP?
I have the read/write/all community string and SolarWinds, but it does not support the Catalyst 2900 MIBs. Perhaps there's another tool that I could use...???
Thanks,
Jon
Hi,
I've got a modem configured and connected to the console port on a 2501 router, but when dialling into it, it answers then at some point during the handshake it hangs up unexpectedly!
Now, I check a register on the modem that gives a reason for the last disconnection and it says that a...
Hey Netwalker,
I had access to the Boson (www.boson.com) tests and scored 931 last week in the routing exam...and I'm over the moon.
I'd highly recommend them - they're very close to the real thing. I had version 3.22, but I believe they're up to 3.92 or there abouts! I can't imagine them...
Hi,
Does anybody know if it's possible to partition a single 16MB Flash SIMM in a 2500 series router?
There's only a single IOS image on it and plently of space for 2x8MB partitions..but can it be done without disrupting the routing?
Thanks a million,
yoggit
Hi,
We've got a 7206 (NPE150) and need to add more RAM to it. However, I'm unable to find any articles on the Cisco web site to help me. I've found simple articles for every other platform...
We have 32MB RAM and would like another 32MB. Is there a second slot for RAM or do we need to replace...
...(C2500-IS-L), Version 12.0(13), RELEASE SOFTWARE (fc1)
...interfaces come up and go down.....(I've nothing connected - just the console)....
*Mar 1 00:01:01.169 GMT0: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:01:01.173 GMT0: %SYS-5-RESTART: System restarted --
Cisco...
OK - here's the answer for everybody.
The show version command returns a line similar to the following for a 4500-M:-
4096K bytes of processor board Boot flash (Read/Write)
This line will not be present on a 4500.
Cheers,
yoggit
Thanks chrisel,
but I think you're incorrect...
From what I read on the cisco site, the 4500-M can have up to 32MB main memory and the 4500 can have up to 16MB, so I've been able to find any 4500's with 32MB and assume that they're 4500-M's.
Here's one of them:- cisco 4500 (R4K) processor...
Does anybody know how to tell the difference between a remote 4500 and a remote 4500-M?
Sure, there's a sticker on the base of them telling me, but I need to order DRAM and Flash and need to know the type, number of slots etc.
Any ideas?
Cheers,
yoggit
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.