Search results for query: *

Thanks for your help on this. Finally worked it out. I added a new subnet for the VPN connections and created a new network rule allowing VPN subnet in. I also needed an allow rule set up to allow VPN subnet in. Cheers.

Thanks very much for the advice. It certainly seems to be a routing isue. I have put a route on the ISA server pointing to the private IP address range of the VPN Client but this doesn't help. When I try to ping the connected VPN client from ISA I get 'Destination Host Unreachable'. In ISA...

I have noticed in the monitoring of the ISA this error message 'FWX_E_FWE_Spoofing_packet_dropped'. Does this indicate that there is no route to the VPN Client network on the ISA server? Or is it a problem with the PIX or VPN client?

Thanks very much for your reply Andy. I have added the private IP address range as a network in ISA and created an access rule allowing all traffic from the newly created network range to internal. Unfortunately this didnt work. I also tried publishing a DNS server to the new network but this...

Hi, Config as follows - Cisco VPN Client - Internet - PIX - ISA 2004 SP1 - LAN. I have the Cisco VPN client terminating sucessfully onto a PIX. The VPN client is allocated a private IP address on a differnet subnet to the Internal LAN private IP address range. Traffic from the VPN Client is...

Hi, I have a PIX sending UDP 514 traffic through the external interface of an ISA 2004 SP1 (fully patched, 2 NICs) box to an internal Syslog Deamon. I have a protocol set up as Syslog, UDP Port 514, Receive Send. I have a Server Publishing rule set up to Allow Traffic, Syslog, from the internal...