Search results for query: *

Livo.. this is a big help! thanks!

Need help on setting up the MAPD card. Would anyone know the default IP address, subnet and gateway so i can just use a cross network cable and connect it to my notebook? we have difficulty in getting the male-to-male cable used for connecting the modem into the maintA port. Thanks :)

Thanks for verifying this idstech. The reason why i'm asking this is to check for utilization and for link maintenance wherein we have to bring one of the ports down but would not know if traffic is passing through it or not.

We have a remote EPN with ports A to D active and using T1s as the fiber link. Since this is not a trunk group, how do we monitor the traffic on the DS1c? how would i know if the traffic is on T1 Port A? or does the traffic go from Port A to D?

In your experience, which is most reliable to use for connecting to NICE? CentreVu Computer Telephony (CVCT) or CTConnect? CTconnect is from another vendor right? while CVCT is from Avaya. Cheers.

Is it possible to use a Single NICE Web Server for different or multiple NICE systems? We have multiple sites that will be using NICE and was wondering if we can save cost on the Web Server hosting it on one site only instead of having to buy one for each NICE installation. Your feedback and...

Hi Buckweet, we are using the TN2793 Analog line card already and the CO card TN747. Any idea where can i increase the baud rate settings for dial out? Thanks a bunch!

we use CO trunk cards for our analog lines and assign them to local extensions using an analog card. Is there a way to increase the modem speed when connecting outside the PBX? it seems that there is a large difference when connecting using a line outside the PBX compared to using a line that...

This forum is really helpful. Thanks to all! :) I've added the following buttons on my phone already.

Perfect! let me try it now. Thanks again dude :)

hahahaha :) good idea!

Any alarm in general. But like the cdr1-alarm, i was wondering why Avaya removed the ds1-alarm on newer versions :(

Thanks again Colby. However, we still have some unresolved alarms on our system and i wanted to focus on the Ds1 alarm. Any other ideas? thanks man.

On Avaya G3R v6, there is this very helpful feature button on the phone to quickly check if your T1/E1s are down. This is the ds1-alarm button. However, on version 9 and above, i can't see this feature button available? Any ideas if this has been renamed to another name or if another feature...

thanks everyone for the help. based on the test, i think we can conclude that it is software version limitation. we are using version 9.

Thanks marcell55. If this really is a limitation on previous versions, then we need to do it on a per day basis. This is clear now.

cool! our version is: Software Load: R009r.05.0.122.2 Memory Configuration: G3rV9 Offer Category: A If you can confirm that it needs to be patched, i'll contact our Avaya rep to get this done. Thanks for the help!

Colby, with the program you created, it would still go to step 3 if the holiday table worked or not. If it did not satisfy step 2, it will proceed to step 3 hearing the hold music before getting busied out. If it satisfied the holiday, it will also go to step 3. I created a sample program that...

Hi colby, ours is already enabled but it still does not work. Any other ideas on where we can look at? i really appreciate everyone's time and effort on this. Thanks again.

That's what i'm talking about :) Thank you all for duplicating this problem. It just doesn't make sense why it should not work but i hope someone figures it out for the rest of us. Cheers!