Search results for query: *

I have 515e running 6.3 Yesterday afternoon I got the new license key from Cisco and put it in using the activation-key command. I rebooted and everything seemingly was ok. Well over a period of a few minutes, we lost access to the internet from the outside. I can't figure it out...

I saw that and did do it but it still doesn't work. There still is the http 192.168.1.0 255.255.255.0 inside but I added http 10.1.0.0 255.255.0.0 inside to reflect our subnet

I am trying to set up my PIX515e and have run into a problem. I changed inside ip address to 10.1.0.1 in keeping with our LAN scheme but now PDM and telnet do not work. When I cahnge the inside ip back to 192.168.1.1 (through console) it works fine ... what gives? I read thread 35-894858 but...

I am looking for a quick and dirty inventory program in Access ... can anyone point me in the right direction. Thanks

That isn't the case, it is on my pc with no other access to it I wish it were that, I could keep people off

Thanks, that seems logical ... when I did it I got an error stating that the database has been placed in a state that prevents it from being opened or unlocked ... I am not sure why

...CurDB Dim Rs As Recordset Dim Ctrl As Control Dim Entry As Variant Set CurDB = CurrentDb() Set Rs = CurDB.OpenRecordset("tblTemp_Grp") ** Set Ctrl = Me![lstAvailable] ** This is where it errors, all tables are in the same db as code, using Access 2002 ... any help would be...

I have read that post, is there anyway you could email me the test db you did if you still have it? I would really appreciate it, that is exactly what I am looking to do ...thanks

I would like to use some functionality that Acces has ... here goes my description: Bring up the forms wizard ... what is that box called that allows you to transfer from the left side to the right side? I want to be able to use this functionality but do not know how to accomplish this. Do I...

that may work, but do I have to do that for all of the .org sites that don't work?

I just set up DNS on my win NT4.0 server sp6a. I can browse the internet except for some .org sites. It is funny, I can get to www.linux.org but can't get to www.emotionsanonymous.org (I am at a behavioral health hospital) ... I can get to the emotions site using its IP address but not the url...

In 5.5 you used to be able to set up an Internet email account, in other words an email account not on the domain. If domain is lock.com and you wanted to add one address to the global address list for sending purposes of block.com, you could easily do this in 5.5 but I can't figure out how to...

I had to set up a route in my firewall, just as you suspected ... I am communicating back and forth and surfing from both networks ... If you guys were here I would buy you a cup of coffee ... thank you very much!!!!!!!!!!!!!

my bad ... 255.255.0.0, sorry

no, it has a subnet of 255.25.0.0, I set it up that way (sonicwall 330)

no, I can ping it from the router, but not from 10.1.3.150

the suspense is over ... I was able to ping 10.1.3.150 from 10.0.3.171, the default gateway was not set on the 10.1.3.150 pc. Thank you both for your assistance ...the only problem I have now is that, with the gateway correct, I can not get out to the internet from 10.1.3.150

The default gateway of my test pc is 10.0.0.5 and I can ping 10.1.0.50 from that pc, I don't think it is a gateway issue

Thanks for the tip, I had already enabled ip routing though. Should I enable a routing protocol? How would I go about doing this, is there documentation somewhere that would guide me through it?

Here is my whole config: Using 923 out of 131072 bytes ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname x ! enable secret 5 x enable password 7 x ! username x password 7 x ip subnet-zero ! ip audit notify log ip...