Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Nasredine

    Enhanced SmartPBX Solutions for HiPath: Comprehensive stations control and CDR Management

    We are a startup company specializing in telephony network solutions. We proudly present Smart-PBX, a comprehensive solution designed to effortlessly manage the HiPath 4000 system. Our product offers two main features: 1.Smart-PBX-Control: This feature provides a user-friendly interface to...
  2. Nasredine

    No CDR output

    Thank you; it works now.
  3. Nasredine

    No CDR output

    After only executing "DEA-SELS:1.", the transmission of data flow commenced; however, only a partial amount of data was transmitted, omitting the records from July. @masviss, could you clarify whether this command has the potential to result in overflow issues? If it does, kindly provide the...
  4. Nasredine

    No CDR output

    Thank you, @masviss, for your assistance. I have successfully managed to retrieve CDR output from port 1202. However, I have encountered a rather perplexing behavior: the CDR transmission halts after processing around 100 to 200 records. Despite waiting for hours in anticipation of new data...
  5. Nasredine

    No CDR output

    Below is the output. I noticed that format FTBL:14 is used by second server where output is mixed with system alarms/warnings. REG-FTBL:1; *** HICOM-Nr: RMX Contract: 00 Name: L01: LOGON ACCEPTED TSN 3018 ALLOCATED 23-09-01 08:46:33 <REG-FTBL:1; REG-FTBL:1...
  6. Nasredine

    No CDR output

    Hi, @masviss I followed the instructions provided in this post (see complete commands at the end of the port): Link, and executed the recommended commands. However, after doing so, I noticed that I am no longer receiving CDR output. It's important to note that the client connection seems to be...
  7. Nasredine

    No CDR output

    Hi @masviss, Apologies for the delayed response; I was on vacation. I've attempted multiple connections, waiting for over 20 minutes each time, yet no data has been outputted. I established a connection with the following device: IP address 192.0.2.3, Port 1202. Prior to making the changes...
  8. Nasredine

    No CDR output

    Thank you for your responses. @sbcsu, can you please explain more the command you've provided. Which text will be more readable ? @masviss, I've executed the commands I connected to the server using Telnet, nothing has been outputted, except dashes ...
  9. Nasredine

    No CDR output

    Hi, @masviss, please find below output of the commands. For the last two commands, there are multiple outgoing trunks. I have executed the command for trunk 1. Please let me know if you need the output for the remaining trunks. @Moriendi, I'm not familiar with Hipath 4000. Could you please...
  10. Nasredine

    No CDR output

    Hi, Is anyone is able to help me reconfig the CDR to be able to access it. Regards.
  11. Nasredine

    No CDR output

    Hi Moriendi, In fact, I noted that my client script was successfully connected the server. However, not output is displayed except the line of dashed "#####". Could you please provide the appropriate commands for each instruction you mentioned? Kind regards.
  12. Nasredine

    No CDR output

    Thank you for your response, Moriendi. I re-executed "DIS-LSSM" commands while I'm connected by Telnet, the table shows that my script is well connected. In fact, I'm not an expert on the Hipath-4000 system. I just want to retrieve CDR records that contain information about the caller/callee...
  13. Nasredine

    No CDR output

    Hi, Here is the output : "DIS-sels;" ********* RMX : LOGON at 2023/02/24 10:23:11 ONLINE BATCHPROCESSING ******** *** HICOM-Nr: RMX Contract: 00 Name: L01: LOGON ACCEPTED TSN 3975 ALLOCATED 23-02-24 10:23:32 <DIS-sels; DIS-SELS; H500: AMO SELS STARTED...
  14. Nasredine

    No CDR output

    Thank you for responses, and sorry to have too many questions. In fact, I've successfully implemented a Python script that collects the data from CDR server using port 1201. I have tried to change the CDR format configuration based on the instructions provided by '1rkm1' in this link However...
  15. Nasredine

    No CDR output

    Thank you for the answer. I've a couple of questions. 1. Yesterday, I received data from 2018, however today I'm getting data from last disconnection time. Can I conclude, that once data is sent by CDR, it 's no longer available ? 2. Does data sent in real-time ? periodically in specific time...
  16. Nasredine

    No CDR output

    I was able to connect and receive output. I should use: 'telnet 192.0.2.3 1201'. Now, I want to connect my PC to the network so that I can access 192.168.10.103 using SSH and access 192.0.2.3 using Telnet. What is the solution? Is it possible to change the destination IP of the CDR to another...
  17. Nasredine

    No CDR output

    Hi, I successfully pinged the server after changing my PC's IP. However, the SSH connection is not working and Telnet is not accepting my SSH credentials that I am using to connect to the machine. How can I determine the correct credentials to connect and get the CDR? Thanks in advance.
  18. Nasredine

    No CDR output

    any feedback please ?
  19. Nasredine

    No CDR output

    I've got : L01: LOGON ACCEPTED TSN 3303 ALLOCATED 22-12-16 17:34:45 <DIS-LSSM; DIS-LSSM; H500: AMO LSSM STARTED...
  20. Nasredine

    No CDR output

    DIS-SELS; H500: AMO SELS STARTED OPERATING CONDITIONS OF THE SELECTION GROUPS...

Part and Inventory Search

Back
Top