Search results for query: *

Hi folks, Please help have fighting with this for a long time now. Need an inbound access to a server beyond inside and need to translate my access from outside to my pix_ inside ip address. Outside (10.X.X.25)-PIX- Inside(192.168.10.12)---Router---Router---Router---Server 192.168.20.X The...

How can I get udp broadcast through the pix on port 5600 from dmz to inside? Is there some command for it, like directed broadcast? Thanks alot.

I'm trying to advertise one new network in BGP in one AS router. (config-router)# network 192.168.22.0 mask 255.255.255.128 I don't see any new net in bgp debug mode, only the old nets. when I change the command to this: (config-router)# network 192.168.22.0 It looks like the router like...

Does anybody know about this problem. I have one 4000 (R1) with isdn interface and one cisco 1600 (R2) whith isdn interface. R1 does always make the connection to R2. idle time out is 3600 on both routers. After successful connection R2 have an virtual access interface: // Virtual-Access1 is...

I've have been following this thread with interest. It would be great if mavenccie could write about mpls solution, in this forum och perhaps on an faq?

I had the exactly same problem with 2 3600 ios 11.2 Could only establish conn. from router1 to router2 not the otherway. The routers have been ok about 2 years back. If you turn on debug isdn q931, on router 2, you will see the line: cause i=0xnnnn - 0x stand for hex number. I got...

When I type sh int on Cisco 4000 I see alot of good statistics, I see that we have problem on our outside wan interface (ethernet)with many collisions, but what does deferred packet stand for? 14835539 packets output, 3468834039 bytes, 0 underruns 0 output errors, 673362 collisions, 0...