Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. OldNECguy

    SV9100 audio output to PA system (Valcom)

    You should be able to affect transmit volume on your paging trunk with 14-01-02.
  2. OldNECguy

    SL1000 block number

    If you mean deny an extension from making any outside calls, you could set its COS (20-06) to a class that has 20-08-02, Trunk Outgoing Calls, set to '0' . But I would beware of denying emergency calls.
  3. OldNECguy

    Help! - NEC SV9100 UK Outgoing E164 Issues - SIP Trunk

    I'm not familiar with UK dialing, but in my tests, to get your stated desire of +441482xxxxxx, you could set 84-14-13 to Mode 1 and 21-17 to 1482xxxxxx. Mode 1 prepends the Calling party number with +44 AND the dialed number with +44. I don't have any settings in 84-39 (all zeroes). In my tests...
  4. OldNECguy

    Can't stop phantom calls on my NEC SV8100

    I have tracked a very similar problem on an SV8100, which was caused by unused CO lines in the 8100. A normal call on an active line with Caller ID would actually trigger an adjacently unused CO line to erroneously 'detect' ringing, ring once and default to static. There are 2 ways to fix this...
  5. OldNECguy

    Direct dialing a number rings on 3 phones. How do I add phones to it? SV9100

    If you haven't got it working yet, what kind of trunks do you have? It could be ringing into a ring group, so a quick check in 22-04 may shed some light. Let us know how it goes.
  6. OldNECguy

    9100 cpu20 sip trunks, 2 new locations

    If your router UDP timeout is 180, and you have 10-23-05 (Keep Alive...) enabled for all 10 digits, 84-14-18 at 60, and 84-14-19 at 5, UDP timeout should not be the culprit. This should send an OPTIONS request every 60 seconds as a Keep-Alive and keep the port open. A packet capture would be...
  7. OldNECguy

    9100 cpu20 sip trunks, 2 new locations

    By the way, what do you see (on your LCD) or hear when you try to call out and it fails? Are these sites linked in any way (CCIS, Netlink,?)?
  8. OldNECguy

    9100 cpu20 sip trunks, 2 new locations

    What was the result of your router bypass (first post)? Have you tried disabling SIP ALG (or sip-helper) in the firewall? Any chance you could do a packet capture (via WebPro) with just the SIP Trunking filter enabled when you're having outbound failures?
  9. OldNECguy

    2100 ringing issue

    You could turn off the CO forwarding, set trunks to 'Behind PBX' in 14-04, DIL them (22-02 and 22-07)to a virtual (to ring at all answering positions) and set 24-09-06 to No-answer forward to the boss's cell number (no access code). That way you can define your own no-answer timing. CO lines...
  10. OldNECguy

    9100 cpu20 sip trunks, 2 new locations

    Oops. Looks like the minimum is 60. You may have to change the UDP timeout in the router.
  11. OldNECguy

    9100 cpu20 sip trunks, 2 new locations

    Have you tried 84-14-18 in an attempt to keep the UDP port open? Might be worth a try. I'd try a setting of 21 seconds or so.
  12. OldNECguy

    SV8300 Call blocking using CID Call Routing

    Basically, it goes like this. When a call comes in via DID, the block number defined in 7600 (for the DID digits-to-Block Number) is searched for in Command 7626. If that DID needs to be screened, the block number will have an entry of 0,1 or 2, in 7626, defining which Development table should...
  13. OldNECguy

    SV9100 Call Forwarding Issue For External Callers

    CoralTech I think you're onto it. I can't think of any other way for the call to end up in a user's VM. The Unscreened transfer is the way to go.
  14. OldNECguy

    NEC ELITE IPK PRI lines ringing

    You could turn on digit conversion in 1-1-21 (assuming your trunks are DID in 3-91) and translate your 4 digits to any extension number in 1-1-22.
  15. OldNECguy

    SV9100 Call Forwarding Issue For External Callers

    If it also fails, you might run a packet capture in WebPro with only the SIP Trunk filter enabled.
  16. OldNECguy

    SV9100 Call Forwarding Issue For External Callers

    BTW, what version of SV9100 is this and is it a CP10 or CP20?
  17. OldNECguy

    SV9100 Call Forwarding Issue For External Callers

    It wouldn't mess anything up, but with 14-01-24 not enabled the system would use the CPN defined in 21-19 or 21-17, or the default Comwave CPN. So CPN is not likely the problem. I'm assuming you're using All-Calls forwarding. What happens to the call if you use Busy/No Answer forwarding instead?
  18. OldNECguy

    SV9100 Call Forwarding Issue For External Callers

    14-01-24 may have a bearing on this. If enabled, does Comcast allow random CPN's?
  19. OldNECguy

    SV9100 Call Forwarding Issue For External Callers

    You might verify that 14-01-13 is enabled for all SIP trunks.
  20. OldNECguy

    call forword CLI need forwerd ext number

    What kind of connection is the 3rd party voicemail? Extension or trunk?

Part and Inventory Search

Back
Top