Search results for query: *

So in my ongoing saga of replacing two 4.2 Aloha terminals (1 server/main, 1 bar) I still can’t get the bar terminal to see the server/main. I’ve installed WIN2K on a new box and I want to replace the main. Do I need the install CD to do this or can I use the terminal setup app from the bar...

Thanks posrescue. So I should change the server name to term1? I've left it's settings alone so far because everything worked with the old term2. I just did not know its settings. You are right on credit cards. We are not running them through Aloha.

It's set as ALOHABOH. I know the terminals can see each other in some form because when one is down the other gives that terminal down error on the login screen. Thanks!

They both are setup with the user TD. I'm not sure why the Server/Term1 box uses that, but I did not want to change anything on it because everything was working until the original Term2 died.

Thanks TJFman. I made those changes, but still no luck. Seems funny they can see each other, but not 100%.

Looks like its in there. Here is what we have.

I checked it out, but it does have everyone checked. That box I've not changed at all since we replaced Term2, so I know it was working before. Just thinking maybe something is not pointed at the right dir. Thanks!

I should bring up that Term2 is mapped to the Aloha folder on the server. It would not let me map BOOTDRV and access the Aloha folder inside, but it would let me map right to Aloha.

I mapped the server to Term2 and it connects just fine. Can copy and write files, so not sure why it's giving me such a hard time. Also started a new thread since I kind of got off topic here since you fixed my other issues. Thanks!

I wanted to start a new thread on this because my other issues are now resolved. So here is my issue: We have two terminals running Aloha 4.2. Term1 is also acting as the server and its running WIN98. Term2 is a new box running WIN2K. If I enter a table in Term2 it shows up just fine on Term1...

Ok, share is back up and both terminal login. Still having the one way issue. So here is my questions: Is the only share on the server/term1 or should I be sharing term2 so the server can access it? Thanks!

Ok, installed WIN2K on the box and lanacfg came right up with no errors! Followed your install instructions Coorsman. Only thing preventing me from testing Aloha is a pesky share issue. Mapped the server on term2 and can access every folder, but Aloha. If I change the folder name to something...

Thanks Coorsman. I'm still getting that same error with the new file, so I'm not sure where to go from here. I've been looking for an old 98install to try and find that file.

After taking a day off to think this over, I'm starting to lean towards the Lana number issue. Seems like it would be the cause of most issues I've been having. Are you aware of any other way to check the Lana on a 98box without using lanacfg? I'll keep working on this dll error and see what...

Sorry, just figured that out. I did find the right one and now the following error comes up when I try to run the lanacfg showlanapath command. "A required .DLL files, netcfgx.dll was not found" Seems that I can't win on this!

Thanks Coorsman. I downloaded Lanacfg.exe and ran it to check the lana number, but I get an error that it timed out after entering the IP and MAC. Any thoughts? Other ways to check/set it? I'm in Michigan. Thanks!

I have not done one. I'm also a little confused about the user setup between Windows and Aloha. Maybe this would be where we are running into issues. Forgive my lack of understanding here, but do we need a windows user account with the same name/password as the Aloha manager? We also had about...

I changed the server to be alohaboh after copying the network settings from the old server. The frustrating thing is they see each other now, but for some reason the server/term1 can't write to term2. My guess is term2 is looking in the wrong place for data. Is there someplace to check I'm...

Here is ibercfg.bat

So I have them both back up. The last two issues I have are: 1. ctrlsvr.exe is not running so we get the grind issue. 2. Term2 does not see any table/food added from term1 or updated menu prices. I'll upload the ibercfg.bat file asap, but I did not see register.bat or unregister.bat on the new...