Search results for query: *

Hi, I have a problem with CFA on CCM.4.1(3). Calls from ip phones to a CCM phone with CFA set work fine, but when the call to the CFA phone orginites from a PBX the calls get dropped. call flow:- option 61e -> (QSIG,E1) MGCP GW -> CCM -> phone (CFA)-> phone. From the GW debugs and CCM traces...

Hi, I've set up several batch files which I need to view all at once. Does any one know if it is possible via the command line to make the different cmd.exe windows open all in different positions rather than all opening in the default position set in the cmd.exe window ?? Thanks for any help...

Is there a maximum response time between a server and a station to retrieve mails on outlooks express ? I ask as a user in Poland is trying to access his mails over a dial-up connection, with a response time of between 600-1500ms. He can connect to the INTRANET ok (very slow)but is unable to...

Thanks for the input GTI4Life, Your right, we showed the testing results to the telco and they agreeded to changed the line from a framed 1.984M DACs to a straight 2048meg pipe . The service is now running errors free. Bookworm

I have a 1920Meg frame-relay connection between two sites, one end is a cisco 3620 router the other a Nortel passport. A few times an hour I get sequence errors on the Nortel equipment and frame aborts on the cisco interface. When debugging the cisco router sends out it's status enquires ever...

Also, i only have access to the 3640 via telnet and would like to debug interface, but as I understand it, the debug command may affect the 3640's performance.

Has anyone come across this problem before ? I have a 3640 going over a 2meg line to a 7513. The link uses HDLC. On the 3640 interface I'm seeing crc errors and aborts, while on the 7513 interface the only counters incrementing is the 'output buffers swapped out' counter, (cisco web site has no...

No, The serial port was configured up just like any 2meg port. No special commands were used, the only difference was the phyical cable. A RS-449 DTE cable was used between the serial port and inversemuxer, as a normal x.21 interface doesn't have any pins for clocking. booke.

Not sure about the WIC-2T card, but using an inversemuxer i've muxed 4x E1's on to a single port on a PA-4T card. The card seems to handle the 8M speed as long as none of the other ports are used on the PA-4T card. Booke.

According to the cisco web site the maximum port speed of a WIC-1T serial interface is 2.048 Mbps Karl