teleplop are you saying that they have changed the exam?
I have not written the exam this year but got 64% (67% to pass) 4 times last year (Yea, same mark all 4 times) I took the global knowledge course and Aced the exam, but the course means nothing to Nortel only the Cert. Exams. I have been...
The F983 - Pswd 266344 will only work if the installer Pswd is 266344 otherwise to Initialise: F983 then the same Pswd that you would use after **266344 on the MICS.
No, I change them from being read only to Archived, They work great on the first 32 station ports and target lines that are associated with them but when you try to push the work sheet past that then I am told that the worksheet is protected and to remove the protection enter a password, it's in...
yes,
what you do is make the door phone ring an ext.(eg. 700) with no call forward and no hotline. then give the other ext. and answer DN for 700, but also make sure that none of them have call forward or hotlines. I usually put a bunch of 7100's in different departments with answer DN for the...
Thanks guys,
I also keep a record and the original copies of all:
1-Keycodes
2-Authorization Numbers
3-System ID's
4-dates of keycode retreaval and activation
5-Upgrades and general system history
for all my systems.
But I would really be intrested in senk1s "keycode for returning to the...
I just noticed in the MICS 6.1 Installation PDF (p480)
that there is a warning from Nortel that if the system is powered down for more than 72 hours that you will have to obtain new keycodes..and this is also in the rest of the installer guides dating back to 4.0.
Has any one had the misfortune...
senk1s
A call comes in to an ext.
It is the wrong ext. or even to reception.
it can be on the public PRI or even loop start trunks.
the call can not be transfered to another ext. on the slave sytem, or vice versa. but intercom and Cen.VM works great.
I have checked the programming on the...
Hello:
Have come across a VERY interesting issues. Tested and
seems to be only happening with a CICS 6.1 wi 00 and a
call Pilot 100 or 150 with Version 2.0 Software.
Wheneven you set the Operator status [F982] to unavailable
the voice ignores this status and the calls are still
making it to...
How do you transfer calls over a private SL-1 network
I have 2x MICS 6.1 with centralized VM. I can intercom, grab trunks from both sides and the centralized VM works fine.... but I can not transfer a call that goes to the wrong ext. back over the private SL-1 network.
is this a problem with the...
...with a M1 and now a Norstar can network with a M1 and they sell norstars in europe with E1 capabilities then this in theory should work (some how)
***I know that the CLID is not passed through a T1/E1 and only through a PRI/Euro Equiv. so there must be something in programming / keycode that...
...the IQMX Turret by going through ASM mod. This will not allow the caller ID to pass through.
:IPC requires an E1 interface to recieve the CLID.
***I Know that a software upgrade on MICS and NAM and I could set up a private SL-1 network (but that is PRI not E1)
I have done it before with...
Already tried "ringing group 003 and 004 with the 7406 in each one, but have the opposite times and lines in each one to match the other groups?"
But you can only have one contol set for each line to control the services...in this case it's x100, the reception on the main floor...you...
I can not put all 10 lines (5 comp.A & 5 for Comp.B) because depending on which company is on the second floor for that day they would be answering the other companies lines too, so to "set to RING ONLY at that ext", the calls would be comming in somewhat blind. The set has HandsFree...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.