Looking for the implementation guide, specifically the data collection forms for Ray Baum Act compliance used when upgrading an R7 SV9500 to R10.
The NENA PSAP export function does not have the sub-fields for the Building, Floor, Room, or seat (nor the conditional fields for Wings, Gates...
Was told by the NEC dealer that the SV9500 does not support standard SNMP, and only has an agent for NEC Command and their monitoring.
Is this actually the case, or is there is SNMP / MIB files archive somewhere on the internet?
Have an existing CM at 6.2 & I'm trying to determine the "correct" number of voice mail ports. Our business model has changes significantly at this location and I’m seeing that we likely have an excess of Voice Mail ports.
Did a list measurements trunk-group summary yesterday-peak for the...
Collapsing multiple Modular Messaging systems onto an Aura Messaging system. We have 3 sites, two on Modular Messaging, the third on Aura Messaging .
Two Questions:
Are the existing DCS+ (over IP) trunks adequate, or does this require seperate QSIG trunking necessary
Whats the actual...
Collapsing multiple Modular Messaging systems onto an Aura Messaging system. We have 3 sites, two on Modular Messaging, the third on Aura Messaging .
Two Questions:
[ol 1]
Are the existing DCS+ (over IP) trunks adequate, or does this require seperate QSIG trunking
Whats the actual migration...
Maybe I'm asking the question the wrong way (would not be the first time)
I am moving to a 6 digit dialplan.
The leading digit of the new dialplan is 8 (8xxxxx)
There are no extensions in the current dialplan beginning with 8xxx
There are no VDN beginning with 8 (8xxx)
There is nothing in...
iggy1952,
Understand that - The problem is freeing up the leading digit 8 to do so. I'm obviously missing one of the above locations.
The amount that the BP wants to do this warrants a solid evaluation if it can be done in house.
Starting the prep work to transition to a 6 digit dial plan. We will be inserting the leading digit 8x in front of the current 4-digit extensions.
At the moment, the dial plan analysis shows 8 as a four digit ext. I need to change this to a length of 6 digits. After making the changes...
The PIVOTS are the first foray into SIP stations on this particular CM. I'm waiting for the network team to wireshark it to see where the signalling is being blocked.
will try the softphones Monday
I'm doing a charity job (free) for a small museum. My scope of work is deploying an aerial RG-11 cable for data, and re-using an existing 12 pair aerial cable for voice.
For clarity, I would prefer to use fiber for the data, their finances force use of coax/HNPA adapter for the network...
Turning up multiple Spectralink 8742 phone on a Spectralink CMS.
WI-FI AP and controllers (Fortinet) are on the Spectralink approved list
Switch is an Avaya CM6, Critical reliability, CM 6.3, trunks are ISDN PRI
All switch fabric is in the same class C, access points are in a separate class...
I have a number of remote sites using G350 Gateways. We will be moving the G350’s into a different class C IP range, all at once, middle of the night type move.
I can’t be at every location during the cut, so the plan is to put a single port Digi terminal server (SKU 70001805) at each...
...Polycom HDX room system, I had a request to deploy multiple analog Polycom Soundstation on a single conference room table, on bridged appearances (Avaya CM6).
I know this is not supported, however I need to find the Polycom support document that *says* this is not a recommended...
I am having difficulty obtaining a straight answer on this issue from the BP's: Will Avaya sell RTU for a Prologix? I am not looking for support, only to legally acquire the RTU
I am working with a very poor non-profit. Their building is wired with 25 pair cable and they lack the money to...
I am volunteering at a technology museum that is located on a closed Army base. Thanks to the BRAC process, the existing switch fabric was removed and much of the OSP rendered unusable.
Here the problem: I have access to quite a bit of Definity & CM5 TN style hardware (including a couple...
Our site recently installed a PC based application called Bell Commander. The application plays pre-recorded WAV files as announcements. It uses a hardware adapter called way-2-call.
I have a concern about the loud "pop" as the device disconnects on the analog station it's connected to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.