Search results for query: *

Many thanks, that's really useful info as always. Thanks again.

Cheers guys. The DCHI card was in Network Group 1, Shelf 1, in slot 11, which was connected to the PRI card in slot 12! I did as suggested and looped the cable via a Coax loop and the circuit came up..... Thanks for your help.

Cheers for your help. In that slot I have a Clock Controller card, which then feeds to the second port on a dual PRI card (DCH 14 and 15),. This however is in Network group 0, Shelf 0 slot 7. Could this be the one?

Hi, I have some config on our system which relates to a circuit we used to have installed. The cable was removed from the PRI card a few years ago and I now have a need to re-install it. The issue is I don't know which card the config is associated with!! We have 10+ Dual PRI cards installed...

...084 V096 V100 V104 V148 N152 N156 SUPC SUPF DDCS 014 062 DTCS XCT 008 016 032 050 064 080 TDS * 008 * 016 * 032 * 050 * 064 * 080 CONF * 009 * 017 * 033 * 051 * 065 * 081 MFSD * 008 * 016 * 032 * 050 * 064 * 080...

Hi, I've got EEST set to YES (and DTMF to YES as well) but EESD is set to NO. Here is the LTM and a Trunk TN: ROUT 2 TYPE TLST TKTP TIE ROUT 2 DES VOIP TN 021 01 MBER 1 KNET TN 021 02 MBER 2 KNET TN 021 03 MBER 3 KNET TN 021 04 MBER 4 KNET TN 021 05 MBER 5 KNET TN 021 06...

...primary-qsig isdn incoming-voice voice trunk-group 1 no cdp enable dial-peer voice 1 pots trunkgroup 1 voice cut-through alert description *** Madrid PABX Extension *** destination-pattern 690.... progress_ind alert enable 8 incoming called-number .T fax rate disable...

...DNIS NO DCDR NO ICOG IAO RANX NO SRCH LIN TRMB YES STEP ACOD 90001 TCPP NO TARG CLEN 1 BILN NO OABS INST IDC YES DCNO 1 NDNO 1 * DEXT NO DNAM NO MFC NO ICIS YES OGIS YES TIMR ICF 512 OGF 512 EOD 13952 NRD 10112 DDL 70 ODT 4096...

Hi John, I've tried that and it also fails. *56 doesn't work to site B via DISA (located on site A), however if you are on site A and do a *56..... direct from an internal ext. it's fine! *57 works fine in all scenarios. I'm having to resort to sending the trace logs to Nortel for help...

NB. Digital phones are working fine in the far location

Thanks guys, it does work halfway (approx 250m) but fails at the 460-500m mark. I'm assuming by a 915m loop it means that it'll work up to about 450m in one direction? I might try doubling up on the pairs as suggested.

...A) via DISA but just not the other site connected via a virtual trunk. The funny thing is that we CAN unforward the phones via DISA????? We use: *57 xxxxx xxxxx xxxxx # to forward and *56 xxxxx xxxxx # to unforward NB. We CAN remote call forward site Bs telephones from telephones on the...

Hi all, We need to move our consoles on site to a different building due to demolition. The issue we have is that the new home for the switchboard is 500m+ away from the PABX and we've tested a 2250 using existing cabling via an IDF and it fails. It works at the halfway stage (at the IDF) but...

Hi all, We had a recent power problem which caused our CS1000S to reboot. Once it all returned we found we'd lost a few days worth of changes. The system rebooted on a Wednesday and all changes since the Monday night had been lost? It sounds to me like there some kind of automatic EDD happening...

Changing the NIT from 4 to 8 (as it is on our other sites) did the trick. Thanks for your help, much appreciated.

...DTT AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 1642 TCPP NO TARG 01 CLEN 1 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO SIGO STD MFC NO ICIS YES OGIS YES TIMR ICF 1920 OGF 1920 EOD 13952 LCT 256 NRD 10112 DDL...

Thanks John, I get LD95 names appearing on the IP sets at the remote sites but just not external DID numbers? A copy of my D-Channels settings are below: ADAN DCH 20 CTYP DCIP DES Vtrk USR ISLD ISLM 4000 SSRC 1800 OTBF 32 NASA YES IFC SL1 CNEG 1 RLS ID 4...

...PTYP ATT AUTO NO DNIS NO DCDR NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 1520 TCPP NO TARG CLEN 10 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO SIGO STD STYP SDAT MFC NO ICIS YES OGIS YES TIMR ICF 1920 OGF 1920 EOD 13952 LCT 256 DSI...

Hi, We have a problem whereby we're unable to connect to our PABXs (various types Opt 11, Opt81 CS100S) using OTM. The problem can be rectified by doing an Initialisation on any of the switches, however, the problem returns a few days later. Our vendor has tried many patches without success so...

The only channel that's failed now is 7, which means I have 1-6 working and we never get more than 2 or 3 in use at any one time. We're having channel 8 change to be multimedia anyway so I'm inclined to leave it for the time being and wait for that work to be completed. I did Nul the MSB key and...