Search results for query: *

Hi, 7965 supports Skinny (SCCP) properitary Cisco protocol & not SIP. 9971 is a SIP device, you can try with it if you have it available. Cheers, ""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For...

Hi, You have TSE. I can only get you info on TSW commands. Cheers, ""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

Hi, It's possible as long you have the latest firmware. Didn't do it for long but it was pretty straight forward procedure with few commands. If I remember correctly all devices on a particular card will be updated together affecting the traffic so plan accordingly. Easier if you have access to...

Hi, You have two ways: first one is complex one involving multiple changes as below 1) Make interface between MD & Cisco router using E1 interface, afterwards make interface between Cisco & Asterisk server as H.323 trunk. Finally use the SIP extension through the Asterisk server. It works as we...

Hi, I am not sure if your setup includes any third party billing system. If it does, then it will be fairly easy as you can run reports based on dialed destinations / Trunks etc. If you are putting your hopes purely on the internal CDR reports in the CUCM then take out the complete excel file...

Hi, I had a similar issue while setting up the SIP trunk. Answer from my SIP provider was that to have security they must receive the nos. assigned for my SIP trunk & avoid any hacker to use the SIP Trunk. We put in a Pilot no from the assigned group of DID nos & now all calls forwarded...

Thanks Daddy, I will do the upgrade & revert with the outcome. Cheers, ""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

Hi, Thanks for your response. I will have a detailed look on NADAP & elsewhere but calls are successfully completing through the alternative choice through VSAT link. ASPAC 237 value 46 & 238 value 26 are updated to retain Qos parameters for both ends but still no success. Network guys are...

Hi, DRG22 is a IP to analog gateway & used for Fax connections. Can you shed more details what exactly you want to achieve. Moreover the hardware is proprietary to Aastra systems for IP Connections and I don't understand how you want to link through asterisk system. To connect with asterisk...

Hi, What is the combination of phone types? All GSM or combination of desk / DECT / gsm etc.To have GSM phone under the parallel ringing list, you are required to setup remote extension functionality considering your system have the license for it. Create a destination & lock it with the...

Thanks Daddy, I thought of the SP but I am more inclined to the network issue as I have another site with SP 03 in combination with SP 05 working perfectly. These sites are in Syria, Gaza, Egypt etc so trying to avoid travel & upgrade. I had a look in RFC doc & couldn't find what could be the...

...000 H'FF H'FF H'00 H'00 H'02 H'04 H'5B H'F6 H'02 H'04 010 H'3D H'48 13.08.10.420 00003 SWSW SIGNAL *************** (H'0000) FROM PRP (H'0004) EXE A IN LIM 001 TO TLP65 (H'03BE) EXE A IN LIM 001 WITH...

My appologise as i was trying to preview to see how tt tagging works & hit the submit button. Pls disregard this post.. I still can't find the way how to post my query properly on IP Trunk so as it can be read easily. Thanks.. ""The truth about action must be known and the truth of inaction...

<tt> <ROCAP:ROU=55; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 55 7120000000000010 5 3000000001 0 30 128 00151515 111110100091 111111 END <RODAP:ROU=55; ROUTE DATA ROU TYPE VARC VARI VARO FILTER 55...

...000 H'FF H'FF H'00 H'00 H'02 H'04 H'5B H'F6 H'02 H'04 010 H'3D H'48 13.08.10.420 00003 SWSW SIGNAL *************** (H'0000) FROM PRP (H'0004) EXE A IN LIM 001 TO TLP65 (H'03BE) EXE A IN LIM 001 WITH...

Dear All, I am trying to initiate a SIP trunk between CM ver 8.0 & our local provider. Provider has put in their own router & told us to enter specific username & password inside my CM settings. We have given PSTN router connectivity with our network connection & core switch is configured to...

Paul, I have done similar setup & it works for me. Pls put in your route parameters between MD & CM. Also as whykap suggested you need to run q931 debug on the router between MD & CM. this way you will be sure that complete info is arriving from CM to the router. Afterwards your Aastra...

Mitel & all, You made me so scared with this adventure that I want to run away from my present job as we are planning to migrate to CUCM from Aastra (Former Ericsson) MD110 system in coming weeks. I have burnt my fingers few years ago while implementing VoIP & to covince my users thats its...

Dear Vikas, Put your route parameters for both LIMs. Also did you make a cross connection between the two TLU 76? Cheers, ""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways...

Dear Martin, Is the Autkey in system & the one you are entering is similar? Board revisions seems to be outdated as well. CAA 158 0047 R4A EXE CAA 112 2940 R1F FB --- Why in FB ?? Did you try to upgrade the board revision without completing the...