Search results for query: *

...6.3(3) interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password ******* encrypted passwd ******* encrypted hostname AnsaPix domain-name AnsaPix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup...

Bump...

...lifetime 86400 vpngroup vpn3000 address-pool ippool vpngroup vpn3000 dns-server 216.237.x.x vpngroup vpn3000 default-domain pix.com vpngroup vpn3000 idle-time 1800 vpngroup vpn3000 password ******** vpngroup password idle-time 1800 telnet timeout 5 ssh timeout 5 console timeout 0 terminal...

Hello everyone, I was thinking about getting into Crystal since we use it a lot where I work. I am a newbie when it comes to this stuff and was wondering if there are any good books you guys can recommend. I have a strong networking background but never really dealt with data. Is there a...

It sounds like the Sasser worm. Norton has a good removal tool, then install the vulnerability patch as indicated at the MS site. It fixed our problem. http://www.microsoft.com/technet/security/bulletin/MS04-011.mspx

Hello, I was wondering if anybody knew how to disable the hot keys at the top of the generic Microsoft Internet Keyboard http://www.microsoft.com/hardware/mouseandkeyboard/productdetails.aspx?pid=021 I work in a call center and my agents keep pushing the buttons at the top when they slide the...

Thank you for the help.

Hello all, I was asked if there was a way to block an ip address at the router. Is this possible with an access list. I was asked to block 4 address. I am not good with access lists any help would be appreciated. Thanks in advance.

...the LAN and accessible through the internet. Could I do the natting for both address through the router. For example have everyone nat through 216.*.*.226(Primary provider) and if they go down have the router dynamically nat 63.*.*.127(Secondary Provider), and set up the one-to-one nats for...

I have a problem our company has two connections from 2 different ISP's. Our primary connection is a T1 line connected to s0/0 of a 2620 router, and the second connection is a wireless ISP connected to Ethernet1/0. Here is my problem my boss wants the secondary line to kick in if the primary...

Yeah that is what I ended up doing thank you for the suggestions.

We have no domains set up. All users are mapped to the drive where the folder is located and within that mapped folder there are folders for each user and the restricted folder im just allowing 3 certain users to access.

I already removed the admin. priv. and that user can still access the restricted folder.

Hello all, I have an issue here. I have a single user with admin priv. who is able to access a folder that is set up to be viewd by only 3 people. The user who is able to access the restricted folder is running 2000 pro. The share is on a 2000 server box. The hard drive is formatted with...

My mistake you are correct two serials S0/0 (Primary ISP) S0/1 (Secondary ISP).

I have a similar question. I'm using a 2620 with two different ISP's. My main provider is on inferface S0/0 my second provider will be on Fa0/0. It will be with 2 different ISP's. If you need any more info please let me know.

Thank you for the info.

Do you happen to know what kind of card I would need in?

I was wondering if the WIC-1ENET card can be used for a 2620 router. I'm having trouble finding the info on Cisco's website. Thanks in advance.

I have similar question. I want to limit bandwidth on a user or ip basis. Could that be done. I am running a 2620 with IOS 12.3. Thank in advance