Search results for query: *

Hello all, I have several sites where I have direct line appearances? Also in Partner mode doesn't the system program just like the partner system? Station 10 & 11, same program codes as the partner. You can also add the Essential license to program easier.

Hello everyone I have a customer with an IPO woth 8.0.42 Using 9620 phones offsite System is equipped with a combo card for VCMs Trouble is when they log in. They have dial tone and make or receive a call. After that no dial tone and can't talk after answering a ringing call. I can watch through...

...Connected the two C-1000B to two trunk ports, door phones connect to the C-1000B controllers, locks connect to the controller. When the door phone button is press the controller send ringing to the trunk port. Inside user answers the phone and dials ** to unlock the door. Works like a champ.

tlpeter Thanks what took so long to answer? LOL

Has anyone installed oneX portal on the same server as the VMPro?

Thanks for the quick response! But I'm not having the issue with the nortel sets. The trouble only seems to happen when an IP set receives a call from outside or from another IP set on the system.

Any thoughts? I have an IPO with 8.0.18 1 Combo card 1 phone 2 w/PRI 1 DS16A expansion module When the IP sets receive an incoming call from internal ip set or external calls the caller hears a 1 second burst of static. We just upgraded to 8.0.42 and the ip sets are at 3.103S firmware. Still...

tlpeter Got it working, what I did was #XXX voicemail collect "#"N LG 0 Transfer # plus extension, press complete(complete shows up in display)

yes I am

tlpeter, I set up the short code. When I answer an incoming call I press tranfer and dial #278 press complete. The voicemail thinks the caller is the user and asks for extension number and password.

Hello everyone I have a new IPO w/8.0.18 and M series phones. I can't find anywhere that says how to transfer a caller directly to someones mailbox. I know on the 14xx series you would press the message button plus the extension number and the call goes. Thanks in advance!

Heard back from the customer today. Pressing # instead of their extension number works great. Another happy customer. Thanks everyone for your quick responses!

Hello everyone, I have a customer with an IPO 8.0 and doesn't want to use visual mail and doesn't want to dial *17 + extension number + password. Can I set a short code that automatically puts the caller’s extension in, and they just enter their password? Thanks for your help

My bad! Let's see if I figure out how to do this Great response time stars for both

Hello, I read somewhere the message waiting lamps on analog phones need to be neon. If so does anyone have a recomendation of a decent analog phone?

Worked GREAT! Thank you! Thay have the 1408 phones

Hello everyone, I have an IPO 8.0, the customer is looking for the caller id of a second call to come across the display while they are on the first call. Is this possible? And where do look to set it up? Thanks in advance

Matt, Thanks for all your help!

...Called[MsgPlaying] Type=Default (100) Reason=CMDRdirect Tag type=Text flags=0x1 [.] [0x00 ] Timed: 03/01/12 17:00 ********** Warning: Logging to Screen Started ********** 5596934mS CMExtnRx: v=RAS, p1=0 CMVoiceMailMsg Line: type=NoLine 0...

...209. Called extension 209 and still ended up at extension 213. Also the change added a pause before 213 started to ring? UNICODE-UTF8 enu ********** Warning: Logging to Screen Started ********** 369469mS T1CAS: Channel E&M 14.5: RX: 0000 -> 1111 369469mS T1Channel chan: E&M...