Search results for query: *

I had to reboot the definity. They came up right away after that. Billy Bublitz Integrity Windows and Doors

It will ignore or drop the vlan 10 traffic. Billy Bublitz Integrity Windows and Doors

Our 3626 phones keep rebooting over and over. The AVPP is up and running. THe phones do these steps. Initializing... Checking code... It then check for files on the TFTP server. Files already exists [From Remote] This message is displayed for all files Trying 10.x.x.x (ip of phone system)...

I can't get my spectralink phone to work at a remote office. I installed a SVP server there and eveything seems fine until the phone checks in with phone switch. Do I have to add a remote network of some sort to allow ip phones on that network to register with the phone switch? Billy Bublitz...

I have 6 meet me conferences created. Is it possible to have all of them being used at once? Is there some sort of limit minus the 6 person max? Billy Bublitz Integrity Windows and Doors

Now I see. I had the password changed in ipo security, but for some reason there is no where to set it in the client. I changed the password to nothing again. I hate leaving anything unpassworded tho. Billy Bublitz Integrity Windows and Doors

VM Pro just deciced to quit working today. *17 will get you dead air. Call status just leaves the call connected until to hang up. The vm pro serivce is runnning. The phone system shows all VM pro licenses VALID. VM PRO is logging this error if someone trys to connect via *17. 14:16:34.713 -...

Well I have squid installed also. But im having problems with that also. Eveything is up and running but.... If I type http://web/ I get an error While trying to retrieve the URL: http://web/ The following error was encountered: Unable to determine IP address from host name for web The...

...internet requests. What I want to add then is a couple sites that are ok i.e intranet sites. I can't find a statment to use along site "ProxyBlock *" to allow some sites. Its easier this way then to specify all domains on the internet lol. <IfModule mod_proxy.c> ProxyRequests On <Proxy *>...

Have they updated the course? I already took those tests 2.7(xx) days. Billy Bublitz Integrity Windows and Doors

Ok it is the remote manager it prompts you to change at first login. I'm in the secuity settings now it's really straight forward. I changed the remote manager then and now I can finnaly change the defualt password for all the groups. Thanks guys. I haven't installed a new IPO since 3.0xx so far...

Yup that worked. This is a self install so the company I purchased the equipment from probably won't ever touch it. After I upgraded to 3.2(17) it asked me to change the password...I did and the username showed RemoteManager at the time. Odd that in the doc it says it will ask you to change this...

I Would like to get into the security settings of the IPO. When I log in as the administrator. RMAccessRequest() - Insufficient rights What is the default username for the security username? I've found doc saying that in 3.2 the the security settings are seperate from the config. Well how do I...

Yes, use DHCP helper on the Switches and keep the server on 1 vlan. What device is routing between vlans? If your switches are make sure you have... "ip routing" command enabled Post a mock network info. Make sure you have the correct routes in the switches if you are using them to route...

3) If the 1841 router doesn't have sub interfaces with encapsualtion dot 1q configured, with the same dscp policy configured as the switches, then once the traffic hits the router you would have to strip the tag. Since your traffic is already tagged by the phone switch. You do not need to use...

1) Do I need to do anything special to trust dscp or do passthrough for dscp tagging to my router? What kind of router you using? As long as the packets are tagged with with a DSCP value via switch/phone system you should be able to set priority or bandwidth over wan links. As long as your...

46XX Handsets already support sip. Definity line they have been using sip since 2004. I do find it sad, the lack of memory on these systems. Thats one reason why we have to use loader version so we have to upgraded these systems 2 times. Not much planning ahead maybe we can start adding memory...

Also you need a route back to your PC. SO in your router if you have vlan 2(192.168.120.0) enabled on the 2848. Add a route like this. 192.168.120.0 255.255.255.0 X.X.X.X(Ip address of vlan 1 on your 2848) This is of course your using your switch to route traffic to the new vlan. Billy...

Did you enable ip routing on the switch? IF you haven't it will only act as a layer 2 device. Ip Routing This is the command on the config# prompt to enable ip routing. Also did you enable another vlan for the other network? Or do you have another port on your router that you are using for...

Looks like 3 buttons are setup as bridge extensions like you said. So I can go into station config and change that. Thanks for the help! I'm new to definity so im learning as I go. Those are some neat commands ill need to add them to my list here. One more question "list trace stat 3713" this...