Doing my head in as this must be easy but i'm just not getting it right.
Using PS 2.
I have a pre-defined ps script that takes some arguments passed at commend line, if I run this directly in ps it will work fine as expected:
C:\Scripts\Install.ps1 -i C:\Scripts\Installer.exe
where -i denotes...
It appeared in my case that when the user doesn't have local admin rights to the machine this would happen. When i used the administrator account or any user with local admin rights it seemed to install happily.
Probably an easy one but i have an address field that is stored in a text file that is over several lines, for example;
The Elms
20 Blar Street
Dudly
2QQ QQ1
This is all one field in the file, when i do my mail merge the adress does display correctly over multiple lines but has " at the start...
I have a Dlink DCS-2100+ wireless camera that i can connect to without problems when using a DWL-G650+ adaptor. However when using a DWL-G650 adaptor (without the +) i can't ping or connect to the camera IP. The card settings are identical to that of the working card and i do actually get the...
We have a Lexmark C912 which for some reason has started to keep printed documents on the queue. The check box for this feature isn't marked but it still seems to want to do it (but not for all users). We have a print server so everyone should be using the settings through that.
Any ideas?
Our DNS servers are internal as such (reside in Holland but are 'inside' to us)
From within the PIX if i use the ping interface i can ping an outside address.
If i use the command prompt within windows i get no responce on the same ip address i used to test within PIX, or when pinging the router...
Chris,
Unfortunatly this hasn't seemed to have resolved the issue. We have an unsusual set-up with regards to getting our internet access - this might be the cuase but maybe you'll be able to answer after reading this.
Basically our DNS configuration goes through to our Dutch office and the...
My typo - interface card i did setup with .146 so that should be ok.
I've no expereince of NAT config or anything so if you could guide me i'd be very please.
Here is the full config as it stands connected to the ISDN unit;
Building configuration...
: Saved
:
PIX Version 6.1(2)
nameif...
Ok, we have a working PIX 506E that was connected to our old ISDN internet router and was all working fine.
We now have a new ADSL device that is to go inplace of the ISDN router. I've tried but had no luck in getting the things to work together.
Our old ISDN box was a fixed IP of 192.168.44.1...
When trying to install Actuate 7 onto a machine immediatly after you have selected which install language to use the application reports that the installation was completed sucessfully. However there is only one file placed into the applications directory and nothing else anywhere (including the...
It appears to close it down, Once you have hyperlinked to the other document if you goto the 'Window' and see what windows you can switch to the original document is not listed and there is only the occurance of the hyperlinked document.
I've seen with another document that this doesn't happen...
My Excel skills are up to scratch and i'm having a bit of bother with hyperlinks.
Basically i have an Excel 97 document that uses hyperlinks to go to other Excel 97 documents. This works fine and the documents re found and displayed ok. The problem is the original document that i had open is...
The user has Notes client version 5.0.9 and we have McAfee Enterprise 7.0 with scan engine 4.3.20 installed.
I have about 8 other identical laptops that aren't having this problem. As fas as i am aware nothing has been installed or modified recently on the machine with the problem.
Using Lotus Notes R5 a user has reported that whenever they try to attach a document, either by the icon or from the file menu the normal window will open but as soon as they select a file or go to change directory the system closes notes. Not always but sometimes they have to restart as notes...
Thanks for your advise - i'm having a few problems with getting anything to display though. I'll always be using all the records in the database at the time the calculation is done so i don't think i'll need to self-join.
What i have is the following;
The field name is Status
The info in that...
Unfortunatly i've gone down that route but there doesn't appear to be anywhere to 'reset' the service counters or however it registers that it needs a service.
Being a somewhat 'newbie' to the world of Filemaker i'm sure this is an easy question.
I've created a smile database that logs support calls, basically on the 1st layout i have a counter that displays the total number of records in the database - this works well and goes up as new records are...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.