Search results for query: *

hello I am wondering if anybody could point me in the right direction. We have a hight number of Linux Servers and we are now looking at the best approach to doing a bare metal restore of these servers. The product which will allow us to do a bare metal recovery would have to be...

thanks people .... As it turned out At the end of the day it wasnt an AS400 issue at all . Once the firmware was upgraded on the Printer itself the prints appeared. CASE CLOSED - Thanks to everybody . Gerry

...start . There is absolutely nothing in the qsysopr message queue . Its very very wierd . I get a message on the AS400 job log (when i do a 4 00 *seclvl) on the job in QSPL and it does say that the spool file has been printed . At this stage It appears that the AS400 has sent it out to the...

Hello I need to set up a HP 8000 printer on the As400 over TCPIP . I am using the following . CRTOUTQ OUTQ(QUSRSYS/TEST2) RMTSYS(*INTNETADR) RMTPRTQ('raw') CNNTYPE(*ip) MFRTYPMDL(*WSCSTA4) WSCST(QSYS/QWPHPLSR4) INTNETADR('10.99.2.100') DESTOPT('XAIX XAUTOQ') It does print off the first...

Thanks . I dont really want to be installing anything else on the box. I'm sure that the config of the sendmail is nearly there... something small/stupid wrong

also on the /usr/lib/sendmail.cf the DS macro states # "Smart" relay host (may be null) DS[10.9.100.4] CP. Thanks

I have spend the entire evening at this . its driving me mad. Basically I want to get sco email out the results of backup scripts to my notes account . ip address of our smtp server is 10.9.100.4 ip address of our sco server 10.99.0.41 I have the necessary routing set up . it works as I...

Does anybody know if the query optimizer can be turned off on v52 of os400 . we have built a logical file to directly query off to extract data from a physical file on the as400 . what does the as400 do .. It goes away and uses a completely unsuitable logical and it takes hours to run . the...

thanks dbase77 much appreciated.

Wondering if anyone could help I have a set of backup tapes that I want to read from The backups were done as follows find /usr /bin -print | sort >> $LOGFILE cat $LOGFILE | cpio -ovdum -C 2048 -K 2048000 -O /dev/rStp0 I would like to know how to read these tapes now . Thanks

Kivju The services that controls this is started by issuing the following commands in the order below . STRTCP STRTCPSVR *ALL and STRHOSTSVR *ALL By doing this it will start a lot of job daemons under the subsystem QSYSWRK . Also ensure that the QUSER profile is not disabled ...

Hi I need to set up SSH (secure shell ) on two AIX systems 1 is on 4.3.3 and the oither is on 5.1 I'll be using PUTTY to access the servers then as oppese to TELNET Any help would be greatly appreciated .

iSeriesCodePoet - Thanks for that info . Works now the is the syntax which will send a file called flagfile.gog to library QGPL on the AS400 ff_mis_srv_02>ftp -ivn 10.99.0.118 << _EOF > user itsograg dublin25 > cd qgpl > as > lcd / > put flagfile.gog flagfile.yes > bye > _EOF Rgds Gerry

Thanks you Annihilannic . I've tried that out and its works percectly . Thanks Again . Gerry

I am trying to get the correct syntax for FTP on an AIX server to and AS400 and have having difficulty with the syntax. Can anybody see anything funny here . Details AIX -server ff_dbase_srv_03 fpirl2 - host name of AS400 Seems to be picking up root all the time as the userid . No...

...problem is with the uppercase . AS400 is non case sensitive , AIX is also need to put a quotes around the user and password as well cmd to run . .> RUNRMTCMD CMD('df -k >/mer.txt') RMTLOCNAME(FF_MIS_SRV_02 *IP) RMTUSER('root') RMTPWD('password22') Rgds...

I am trying to FTP from AIX server to and AS400 and have having difficulty with the syntax. Can anybody see anything funny here . Details AIX -server ff_dbase_srv_03 fpirl2 - host name of AS400 Seems to be picking up root all the time as the userid . No entries in the /.netrc file at...

Thanks - thats all it was User id and password in correct case . I thought it was some AIX set up parameters Full command is : => SBMJOB CMD(RUNRMTCMD CMD('df -k | grep /e >/ora.txt') RMTLOCNAME('10.99.0.151' *IP) RMTUSER('root') RMTPWD('password')) JOB(AIX) JOBQ(QINTER)

...However when I to run a remote command on the AS400 (see below) cmd to run . .> RUNRMTCMD CMD('df -k >/mer.txt') RMTLOCNAME( FF_MIS_SRV_02 *IP) RMTUSER(ROOT) RMTPWD(password22) ie I want to run the command df -k >/mer.txt on AIX server FF_MIS_SRV_02...

...by doing a Ccommands . ie all as400 save commands start with SAV Similarly all restore commands start with RST DSPOBJD OBJ(QSYS/RST*) OBJTYPE(*CMD) you get the picture .. Also remember that all commands can be prompted Most commands that you will need are in Library QSYS ...