Add it to the sendmail.mc file just to be sure it
is reading it properly.
define(`confTO_QUEUEWARN', `30m')dnl
define(`confTO_QUEUERETURN', `4h')dnl
As you can see I don't want the mail on my server
for more than 4 hours and the user will get warned
after 30 mins. This cuts down on the...
Do you not have a log analizer set into place?
Like webalizer. Otherwise just write you a little
bash script that looks at how many times the
sites are hit and how much data it it sending.
You should be able to do this with some simple
grep and cut commands.
Can you even see the machine ping or anything? NO: check
network settings. Can ping should be able to at least
attach. YES: try to attach and see.
Can you log onto the AD Domain via the console?
I agree with oceanid1. You need to remove all associations
with the nic before removing the nic. I found this out
when I was replacing a nic and couldnt use the ip till I
reinserterd the nic that was in and removed it's settings (set to dhcp). Then I could use the IP again.
The looking for...
Have you tried to connect as?
Can you not browse to the "workgroup pc" and connect as?
All you should have to do is give it the username
and password. at worst you have to specify the workgroup name:
workgroup\username
passwd
Works for me.
reinstall tcp ip. I had it before. I had it last freakin week when I had to reboot a 2000 server each time I changed IPs on the thing. Reinstalled TCP/IP and all good again. (lab)
The stack goes whack and I dont know why... NT has this same issue. Will it ever be solved? NO.
Oh and could also...
Router hard coded to 100 Mbit FULL DuplexDuplex?
Get rid of the hub. You can have a 24port semi-managed
switch for $99 (not great but better than a hub)
If router 100 and hub 10 and no way for either to change
then it wont work.
Not to mention the benifits of 100 vs 10 (2-3 times better)
Have you tried swapping out the nic?
Connect a laptop to the node and see if it looses connectivity.
Changing a nic..takes 5 minutes
Saving hair ....last a lifetime
once your done stop smb then
smbpasswd -j domain -r passwdserver -U username%passwd
must have a account on the smaba server not a smbuser but a real adduser. Didn't need the smbuser. Though it looks like this is your PDC
...runs on $LAN_IFACE, and the Internet is on $INET_IFACE.
#
# 1 - We masquerade at the 'nat' table, POSTROUTING chain if and only if:
# * It comes from our LAN
# * It goes out through our Internet interface.
# 2 - We ACCEPT to FORWARD if :
# * It goes through our LAN...
Can you say Qlality of service. Supposedly XP will have less errors in transfering packets, unlike 98 hence Microsoft says it may seem slower but it tranfering fewer packets and a higher success rate.. BS?
Look for tweak...though they dont help much.. I have a gigabit connection to my linux...
Most motherboards IRQ for PCI have only for. Check your motherboard manaul and see if the nic is sharing with something that doesnt like sharing.
AGP IRQa
slot 6 IRQa
slot 5 IRQb
slot 4 IRQb
slot 3 irqa
slot 2 irqc
slot 1 irqd
usb irqd
Or something like that. there is a chart in most books...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.