Search results for query: *

The "Find" tool is your friend. Open the pdf for the PC programming manual. From the "Edit" drop down menu, select "Find". Type "gain" in the "Find" search box. The first entry will display the table of contents for "audio gain". This will point you to the page in the manual where it...

There is also a link for KX-NT550 firmware within the same post as the v9 firmware you downloaded. I have no idea if that will resolve your issue or not.

You may want the latest manuals to go with the v9 firmware. See this thread for the download link and the password to unlock the manuals. I don't if the password will unlock the German language manuals or possibly a translated password???

EMJP posted a link to v9 firmware for both the basic cabinet and the expansion cabinet. There is also a link there for v9 maintenance console as well as some other firmware for cards, etc See this thread.

See this link on how/where to download the manuals.

At the end of the Programming Manual, it has a section titled "Feature Programming Reference". Within that section, find the feature "Time Service". It will ist all the related programming sections. This should guide you in what you need to program.

What you are attempting to do is add "Tie Lines" between the PBXs. The Feature Manual details what is involved. Look for "Tie Lines" within the network section of the Feature Manual.

I didn't on mine, but I have a bit of a different method that we handle after hours calls. As I mentioned in my previous post, its been a couple of years since I last dealt with this. I'm sorry, but I just don't have the time to research the documentation and then apply your scenario to arrive...

If this is a new installation/power up, it is normal for the status indicator to blink during initialization and will take approximately 2.5 minutes to cease blinking when switched to normal. If the flashing occurred while in use, the installation manual details what the different flash...

It is about as clear as mud in the documentation and it did take me a bit to figure it out. The last time I dealt with this was about two years ago, so I maybe forgetting something. Yes, you do have to configure the calendar. You'll also need to create incoming call groups: PBX...

I'm in the same boat you are, a KX-NS700 with UK voice guidance prompts deployed in the USA. I'm just utilizing this in my home. It is just my bride and me that have voice mail boxes. So we just live with the British accent of the UM system prompts. From what I've been able to determine, the...

The Unified Messaging system (voice mail) prompts?

The UMC is not upward compatible. For example, you cannot utilize a v8 UMC to modify a v9 system personality. A fellow posted links to the v9 UMC (and other updates) in this thread: https://www.tek-tips.com/threads/nt700-firmware.1830795/

Try removing the cards and interconnect boards and then re-install.

To measure the open circuit voltage, simply connect a voltmeter across the pair that serves the relay contacts, within the KX-NS5162. Pins 1 & 2, for door opener #1, or pins 7 & 8, for door opener #2 of the door opener jack. Start with the meter set to measure AC voltage first and follow by...

What is the open circuit voltage from the gate?

Which portion of the KX-NS5162 is being damaged, the intercom, the gate controller, or both? Is any portion of the cabling buried? If so, direct burial or within conduit?

Of course, any surge protection is only going to be as good as the earth ground you connect it to.

I don't think a fuse will do much for you. I doubt if it would act fast enough (blow) before the damage was already done. Bear in mind the current has to exceed the fuse rating before it blows, so the card ports will be exposed to the surge. As I indicated in my previous post, the telephone...

I just stumbled across v9 of the Web Console in another thread. I upgraded (selected modify, not repair or remove from the install menu) my v8.3 to v9. I can now access the NS700 personality directly in online mode. https://www.tek-tips.com/threads/nt700-firmware.1830795/