Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. morrisj3

    SV8100 - PRI - No caller ID

    Try checking with the line provider to see if CLIP/CLOP is enabled on the line
  2. morrisj3

    How do I add a COI-4 card for a Aspire-s

    Right, sorry for the delay, ill help as much as can. Im taking it your using the ASPIRE programming tool. So when you have put the card in the system, connect and take a full download of the system, then in easy edit mode, navigate to cards, card configuration. Then insert the correcet card by...
  3. morrisj3

    VM505 IPC

    is it for the IPC100 or IPC500? and do you mean for the inskin voicemail?
  4. morrisj3

    How do I add a COI-4 card for a Aspire-s

    is this resolved?
  5. morrisj3

    how to make group in nec ips 2000

    ok, the best way to do this in my opinion would be to create a virtual extension and assign that key to all the extensions in the group, including the operator. remember to make the button ring though! to create the virtual extension use cmd 11,len,ext number. now use cmd 9000,(button number)...
  6. morrisj3

    Audix Voicemail and Auto Attendant

    its an old inskin slim audix version4! its nearly 10 years old
  7. morrisj3

    Audix Voicemail and Auto Attendant

    thanks all! I think its working now, set the transfer type to basic, and added the extension number in the transfer dialplan and its working.
  8. morrisj3

    Audix Voicemail and Auto Attendant

    thanks prflash, it is set to none, under transfer type. When i change it to enhanced no cover, or enhanced cover 0 using the f6 key and choosing the option from choices, and enter it says "invalid Input" i have also tried entering a covering extension but this still doesnt let me change the type...
  9. morrisj3

    Audix Voicemail and Auto Attendant

    no just a 6408d handset
  10. morrisj3

    Audix Voicemail and Auto Attendant

    yes I have transfer set to yes, and the extension exists
  11. morrisj3

    Cannot hear announcements

    Can you hear the page when close to the phone and listening for the page? if so try picking up the handset and pressing the volume up key and that should turn up the volume of the speaker
  12. morrisj3

    Audix Voicemail and Auto Attendant

    Hi SF0751 I have an X port station of 1070 with a coverage path going to the audix, when you call the DDI it gets answered by the audix. But when you press a single digit option it says "you have selected an invalid option"
  13. morrisj3

    Conference on NEAX 2000 IPS

    If you havent pressed the conference key you can press the transfer key again to get the original caller back, and that will disconnect the user you called which has gone to voicemail.
  14. morrisj3

    2000 IPS no call fwd on Matworx 11.0

    The commands for call forward in MOC mode are: E600 Forward All E601 Forward busy E602 No answer E603 busy/no answer
  15. morrisj3

    NEC XN120 Programming

    It will show you how the system has been programmed, under card configuration on the easy edit menu it will show which cards are in the programming on the system, but this is only how it has been programmed and doesnt mean there is definately an op box or ISDN BRI card installed. To be certain...
  16. morrisj3

    Audix Voicemail and Auto Attendant

    I have now recorded a message and put the following in the 3rd page for testing and none work. I get the message "you have selected an invalid option" when you try any of the digits Button Extension Treatment Comment 1: 3054 transfer Jane 2...
  17. morrisj3

    Audix Voicemail and Auto Attendant

    thanks Ken07734! I have added sub 1070, and changed the type to auto-attendant, and on page 3 just added under key 1, ext 3054 and treatment transfer. I have programmed the definity to route a DDI to 1070 and put that in the cov path of the audix. When I ring the DDI the audix answers and...
  18. morrisj3

    Audix Voicemail and Auto Attendant

    Hi All, Has anybody ever setup a auto attendant on an Audix voicemail? Can you provide me with some help/guide? Many thanks John

Part and Inventory Search

Back
Top