Search results for query: *

or setup a department group add all your extensions and away you go. I prefer the Virtual Extension ring although this method does not work with SLT or IP Dect.

You have to assign the Trunks a TRS of 1 for instance and enable the maximum digit table 1 which has the maximum of 30 digits. In default thjis is set to 0 which restricts the digit length to 24.

SV9100 outputs SMDR via LAN on port 4001. There's no licence for this basic SMDR.

Depends on how your accessing TVM, normally one would dial the VM pilot number followed by #6 *998 or *999 followed by the default password of 1234

Also set your virtual exts (Portable Station) cos to 7 and also disable remote log on to extension 2 -> 7 -> 1 Optional Device & Other Extensions -> Remote Operation by Other Extension set to Deny

Use a time control menu instead. I have something similar setup for one of my customers. I'll get a screenshot when I can.

Is it listed when you click on forced de-registration?

You can actualy log in to webpro and downgrade to the version you have although I wouldn't bother

Try basilisk browser

Bit rusty on these old things and has been a verrrrryyyyy long time but how I read it in the manual is -> 3112-01: KEYRG on all 3 (this refers to DAY overflow) 3112-04: 303 on all 3 3112-05: Yes on all 3 (this refers to NIGHT overflow) 3112-06: 700 on all 3 theres a timer somewhere too but...

They won't be compatible.

Why not replace the door phone for an IP intercom from fanvil or 2n and then you can use those ethernet surge protectors. Presumably you want to protect the dph2 card, back in the day we used those krone strip surge protectors. I've had the same instance of bad cards due to surge current.

Dont think thats how FXO works. Each SIP TRUNK channel on the SV is licensed and your converting SIP to analog so would not the FXO output connect to an Analog line card?

on the cpu card of the TDE is an analog input for MOH/BGM. IIRC the TDE has SVM so if I am correct you can upload a wav file to the OGM

Have you got automatic line seizure enabled on your extension?

Yes, but if you have access to the web programming you can change the operators extension (temporarily) and use the *782 code 2 System -> 2 Operator and BGM. *790 clears features set BTW like call forwarding

Actually its * 7 9 0 im used to NEC programming these days. If you are trying to dial out from these handsets and they transfer you to the operator then its likely the extension has been locked. You can unlock this from the operator phone by dialling SPEAKER * 7 8 2 EXTENSION NUMBER SPEAKER...

Hmm. Try dialling 790 from those problematic extensions and then try dialling them internally once done.

2 separate sip accounts you'll have a hard time sending company b ddi to the registered sip account as call will always come through on the lowest available line which in the above scenario belongs to company a.

Perfect thanks