Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. MrMitel

    ACD Agent receiving calls while on different line

    Just to add on from LoopyLou, if not reflected in the CCM reports you could set a specific make busy reason code for agents to use when answering non-ACD calls
  2. MrMitel

    ACD Agent receiving calls while on different line

    Not sure if this would would work in an ACD enviroment but there is a COS option 'Force Device Busy If Any Line In Use' If the agent answers a non-ACD call they can still go make busy by pressing the 'make busy' key on their handset whilst on the call, the make busy timer will start from the...
  3. MrMitel

    5550IP on lateset MCD query

    The 5550 can receive its address via either DHCP server, windows or 3300 but it does not support CDP or LLDP, connect the keypad to an untagged voice VLAN port on the L2 switch
  4. MrMitel

    ACD SETUP

    Can you confirm how you want the phones to ring on the helpdesk number, the reason is that you mentioned 'multicall' above Do you want all the phones on the helpdesk ring at the same time? Also, will you be running reports on the helpdesk number and be viewing the agents in real time If no...
  5. MrMitel

    Mitel SX2000 Operator phone rings every 10 minutes

    The Option to enable SMDR is located in the SMDR options form, it will then need to be enabled in the class of service of all sets and trunks You first need to look though in Dimensions and Features form, this will show you if the internal SMDR option has been purchased, if not you are out of...
  6. MrMitel

    Class of restriction

    Okay, take a number that the user can dial and look in ARS digits dialled, check the route it uses and the associated COR group, what COR numbers are in that COR group? Do you want to restrict certain users from using particular trunks? If so, I would use ARS lists and interconnect restriction...
  7. MrMitel

    Class of restriction

    Im assuming this is a Mitel 3300?
  8. MrMitel

    3300 ICP Voice Mail

    Use an FTP client and go to /vmail/c/vm, then copy the file parm.bin Open using notepad and you will see 3 x 4 digit numbers, these will be the admin, manager and technician level passcodes for the admin mailbox (9999) There is an option to 'erase the current setup and configure a new...
  9. MrMitel

    how to view offline backup on Mitel 3300 MXe

    You can export the forms in a .csv format, are you looking for anything specific? What is it you want to achieve?
  10. MrMitel

    How do I setup a notification VM that does not allow messages to be left

    Okay, so 457 is the voicemail hunt group, press * when it answers and it should say please enter your mailbox number, is 5333 the mailbox or extension number? Obviously you need to enter the mailbox number What stage are we upto? if the service number diverts to voicemail now what happens? Have...
  11. MrMitel

    How do I setup a notification VM that does not allow messages to be left

    What number are you dialling when you get 'that mailbox number is not valid'?
  12. MrMitel

    How do I setup a notification VM that does not allow messages to be left

    If you are configuring the voicemail under the voicemail tab in the 3300 config tool, its embedded How does the call route to the service desk? You will need to delete the mailbox and re-add as a menu node mailbox, use the same extension and mailbox number as the existing, the new greeting you...
  13. MrMitel

    How do I setup a notification VM that does not allow messages to be left

    Just to add, I assume you are using the Mitel 3300 embedded VM, would help if this info was provided on the origianl post, thanks
  14. MrMitel

    How do I setup a notification VM that does not allow messages to be left

    There is a way to play the message and disconnect using embedded VM, the mailbox type should be set to menu node, then from the admin mailbox edit the menu node and set it to disconnect on time out, this will play the message (mailbox greeting) 3 times and then disconnect the call, no need to...
  15. MrMitel

    3300 Browser Connection

    One way to prove that the web services are running is to disconnect the 3300 from the network, assign yourself a static IP address on the same subnet and see if you can browse to it, I know its not always possible depending on what enviroment the controller is deployed in Also, using putty can...
  16. MrMitel

    Imat display outgoing number

    Is there nothing being inserted in the digit modification assignment? For example, in the UK 141 would be inserted to block outgoing CLI
  17. MrMitel

    call pickup report

    You will need to run the agent performance by period report
  18. MrMitel

    Voicemail not allowed

    Agree with kwbMitel and wireman50......if you want ext 202 to reroute to VM, reroute 202 in the call rerouting form to the VM hunt group I was under the impression that you wanted to drop the call into an alternative mailbox, thats why nametag huntgroups were suggested
  19. MrMitel

    Voicemail not allowed

    Are you trying to reroute an ext to the mailbox of another phone? As an example.....if you have ext 100 and you want to reroute it to the mailbox of ext 200, create a nametag hunt group *200 and always reroute this to the voicemail hunt group, then give ext 100 a first alternative to *200
  20. MrMitel

    sx2000 database error

    Sorry mitelsx2k, i will have to declare myself out, I have only ever known of a datarestore fixing this type of fault

Part and Inventory Search

Back
Top