Search results for query: *

No, it doesn't - just need to buy a PRI30 (KX-TDA0290) card

PBX Configuration -> 3. Group -> 1. Trunk Group -> 3. CallerID modification Just add you CO-line access prefix ("0") to CallerID.

It obviously means that at some moment PBX doesn't have enough resources of digital signalling processor (DSP) card and, by that reason, can't handle another call, that needs such resources. Check DSP resources utilization at PBX Configuration -> 1. Configuration -> 5. DSP -> 2. Usage Probably...

You have to connect to your PBX through the local network using http protocol. Then change the INSTALLER's password to something complex. Your password must have at least (summary): - 3 uppercase letters - 3 lowercase letters - 2 digits. More of this: - there must NOT be any consecutive...

The Master password is 6594898804 But... I'll ask you again: Do you know the procedure of Master password applying?

No, it doesn't.

Do you know the procedure of Master password applying?

2.9 System Options -> Option 3 -> disable Conference Tone

https://manualmachine.com/panasonic/kxt1620/3221843-operation-manual/

Have the NAT override settings been made on the PBX? Upd Oh, i see - UPnP... Try to change it to STUN if you don't have a fixed external IP-address. And check again network settings of the PBX.

Be very, very careful. I think it's better fo you to contact an authorized Panasonic service centre.

009-000-130 - my PBX About version newer than 009-000-180 - perhaps, but I haven't seen.

I haven't worked with VM but such a feature is claimed by Panasonic. See Feature Manual, paragraph 3.2.1.2. Auto Forwarding.

Don't remember such option....

I had absolutely the same issue after updating to v.9. Sorry, but I can't remember just now, how have I fixed it. Try to deregister your Mobile softphones in the PBX trough Forced De-Registration option, delete old SIP-accounts, reboot your PBX and create accounts again. DO NOT delete an app...

Scenario 1: 4-1-1 (or 4-2-1) Extension Settings -> Option 2 -> Manual call waiting for Extension call -> Set to BSS (for the destination Extension) When you making an internal call to that extension and hearing a busy tone, just press 1. Scenario 2: 2-9 System Options -> Option 5 -> Automatic...

First of all create an ICD-group (e.g. 6003) with three of your front desk extensions (3600, 3601, 3602). Type of that ICD-group has to be set to "Ring". Then you have three different ways. 1) dial floating extension number of the group (6003) 2) set 6003 as an operator extension and make an...

System -> WeekTable

Perhaps this will help you...

Just tested at our KX-NS500. 1) "MicroSIP" Softphone client as W-XDP/Shared Ext to KX-NT680 IP-PT (NT680 as main, MicroSIP as slave). Call to NT680 Ext. number, both NT680 and MicroSIP rings. Works well. 2) KX-NT680 IP-PT as W-XDP/Shared Ext to "MicroSIP" Softphone client (MicroSIP as main...