Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: GrandmasterOPI
  • Order by date
  1. GrandmasterOPI

    More forums like this

    Anyone know of any other sites similiar to this?
  2. GrandmasterOPI

    Caller Screeing - Whisper question

    All u need to do is direct the I/C call to a VM :"Module NAme" with the whisper action configured at the star point
  3. GrandmasterOPI

    IPO to IPO thru Cisco 1720 over Frame

    The 1720 routers are QOS capable arent they???
  4. GrandmasterOPI

    Mission Impossible

    Have a customer with 3 networked sites, no vcm's, no voip over ip trunks, but they use PM speed dials to monitor extensions, they want to be able to use speed dials which are the same number as the remote exts to dial over pstn ie ext number 300 at site B to be dialled by dialling short code/...
  5. GrandmasterOPI

    VM Pro not going out of night service

    Time settings work perfectly as long as the apps are started as specified in the manuals/help files. Have had one site though where the time would not update at all, time display on a 2050/30 phone would not tick over at all, just sat on same time, monitor would show same time, had to replace...
  6. GrandmasterOPI

    Out Of Service

    no good reason for this not to work as long as you have the group with the user in it in the OOS field, and be sure that the group is being set to OOS, Open config after putting group into OOS and it should have a cross beside it
  7. GrandmasterOPI

    VM PRO Not answering

    Ensure VM lite is not running, or was not installed before or after VM Pro. The service ( if running as a service ) is validated with a valid user account. Licence is valid so your 2 hours of grace hasnt expired.
  8. GrandmasterOPI

    Group ringing over 2 ip-office sites

    At the site where the call is recieved via pstn the destination group can have vitual users that fwd to the ext number on the remote site as well as the local extensions.
  9. GrandmasterOPI

    Overflowing calls with SCN

    Can add users that fwd to that ext
  10. GrandmasterOPI

    Overflowing calls with SCN

    Yeah, that would work fine,I should have said bring the call into the group . If a local grp has the users with exts 3NN , the ip ext's off the other site, and I have the short code 3nn dialing on IP trunk would that work?
  11. GrandmasterOPI

    Overflowing calls with SCN

    Carrying on this conversation... Site B 403 has sevral IP phones which are ext's on Site A 403 for CCC reporting which runs at site A. Easiest way to have local call from Site B location ring on the IP ext...Bring call into group which has user fwded to IP ext numbers???
  12. GrandmasterOPI

    More on SCN

    I have sites where the direct media path causes the systems to reboot, ever seen this
  13. GrandmasterOPI

    Forwarding and SCN

    The way I read your post it says that the forwarded ext is doing what it is set to do, what is the problem?
  14. GrandmasterOPI

    Volume control for 20 series terminals

    Or just plug a display phone in adjust to suit then put 2010 back
  15. GrandmasterOPI

    SCN Master Site

    Further to this, the network is private dedicated ADSL lines in star topology into the providers network
  16. GrandmasterOPI

    More on SCN

    If customer network has 30 sites the Main site will have 30 IP trunk lines. Each line must have a unique number within the system. ie lines 101 to 130. As you cannot give a line a number greater than 249 there are not enough numbers avaliable to have unique line numbers over the entire network...
  17. GrandmasterOPI

    SCN Master Site

    Have customer with 15 sites at moment growing to 30 over next year or so. Main site has IP trunk lines to all other sites. From what I've heard in here I should not configure the other sites with lines to all others but just one to the master site or it will cause problems. Is this correct.
  18. GrandmasterOPI

    Force extension to dial on specific Line?

    change outgoing call id on line you want to use to a unique number, on the fax ext use short code ?, ., line id the new number, dial
  19. GrandmasterOPI

    Switch Rebooting FATAL TLB Data Error

    Have also seen on SO 2.0.16 as follows ********** Logging to File Stopped on 22/3/2004 09:49 ********** ********** SysMonitor [Version 4.0 (11)] ********** ********** contact made with 10.15.56.40 at 09:49 22/3/2004 ********** ********** System (10.15.56.40) has been up and running for...

Part and Inventory Search

Back
Top