Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jmcevoy

    NBX logs

    Hi All . Can anybody advise where the logs are stored on an NBX V3000 , I have a system that seems to continually loss the available memory , As the log files are quite large i would like to clear them but i am not sure how . Any advise you can offer on the log or memory would be appreciated...
  2. jmcevoy

    NBX calls auto cut off after 4 hours .

    Hi . does anyone know of any settings on the NBX that would cause calls to disconnect after 4 hours . I have been asked about this today and i can't see any info , Only thing i can find is a line provider fail safe disconnect . Any info will be appreciated . Regards . John .
  3. jmcevoy

    NBX MoH

    Hi . Can I please ask if any of you know a way to get the NBX to play beep or any tone for calls placed on hold , When there is no External source connected ? I have tried today and can only hear silence when on hold , This is the same if MoH and MoT under system wide is ticked or unticked ...
  4. jmcevoy

    Vlan tagging on 3102 phones .

    Thanks for the info .
  5. jmcevoy

    Vlan tagging on 3102 phones .

    Hi Guys . Can I please ask if any of you have experience with setting Vlan atgging on these phones , What i need to konw really is can the data port be set to a different Vlan as the phone port . I know i can set the Vlan settings on the phone using the program key . Just not sure if i can...
  6. jmcevoy

    Night service

    Thanks Steve .
  7. jmcevoy

    Night service

    Hi . I am looking for the programming code that is used to set the time for the night service to kick in automatically at say 5:30pm . I have just forgotten what one it is . Regards . John .
  8. jmcevoy

    Panasonic KX-TDA30 BRI problems .

    BT have finally admitted Fault at the exchange . Thanks for the Help . Warm regards . John . This can be Closed off I can't see how to do it .
  9. jmcevoy

    Panasonic KX-TDA30 BRI problems .

    Hi Thanks for your reply . I have checked the settings and they match your suggestion . I have also uploaded a copy of the config witch can be viewed with the unified maintenance console . I have swapped the ports on the system and the lines dropped off in 3&4 instead of 1&2 so it does seem...
  10. jmcevoy

    Panasonic KX-TDA30 BRI problems .

    Hi ALl . I have A Pana. KX-TDA 30 that is having issues with BRI . Here is what i have experienced so far . Lines 1&2 drop out intermittently leaving only 2 line out of 4 working . System is set point to point . BT Tell me the lines are set point to point . I have Changed out the BRI 2 card...
  11. jmcevoy

    vacant number message when ringing busy attendant LDK-300 Hotel

    Turns out they had an Analogue phone plugged into a Digital extn. port and the attendant problem was incorrectly reported . Thank you all for your help .
  12. jmcevoy

    IP LDK20 - simple analog 4 way setup

    You would first need to check if you have a BRI or LCOB system , If it has a BRI card you can't connect one analogue line to it without the LCOB .
  13. jmcevoy

    Aria 24IP

    Is the SLT connected using an adapter ? If so Please try a PABX master adapter or check the SLT for a ringer volume switch or slider .
  14. jmcevoy

    IPLDK 60 not start "SCOUT-DX V1.1 NO SYNC" DISPLAY

    Hi is the PABX Adapter your phones connect into a slave or master ? If master you need slaves and your Digital key set will not work with the capacitor in the Master adapter . If connected to Sockets and not a cat 5 network , Open the socket and check for the (Usually Yellow) capacitor and...
  15. jmcevoy

    ip LDK 100 flexible button codes

    Hi Mallers Do you have a copy of LDK PC Admin software ? if so it is easier to change the programming on Flex keys with this software as codes are hidden behind the interface , You can also find the codes in the manual how ever one of the other chaps on the forum may be able to provide a link to...
  16. jmcevoy

    VoIP with LDK 100

    Hi Jezt . I think what this Someone you know is referring to is SIP Trunks ( Or non-geographical numbers ) I'm not sure if the LDK can support SIP trunking as the only way to connect the SIP trunks would be a LANU Daughter board on your MPB . It may be possible on higher software revisions 3.6...
  17. jmcevoy

    IP address on LDK100

    Hey Montyzummer the engineering bypass password is 147* but on higher than 3.6 versions this no longer works just an FYI
  18. jmcevoy

    LG - GDK 100 DTMF

    Your system will need a DTRU board to send DTMF tones fro any hand set on system
  19. jmcevoy

    HELP - LG ipLDK20 Problems...

    Call BT to Make sure that you are set on point to point and not point to multy point failing that probably a faulty BRI card are suggested by Wishforall
  20. jmcevoy

    IP address on LDK100

    Hi Jez from the system attendant normally station 100 first port on system pgm 108 for ip settings and pgm 140-142 for line programming make sure that only line 3&4 are in line group 1 and the rest in line group 2 that will sort it for you .

Part and Inventory Search

Back
Top