Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mike112

    Dual Boot?

    I have used a startech.com USB to SErial Adapter with com port retention and it has worked on the old fms/vms/and AD-8 voicemails and with the SAT software for the elite 192's and IPK's. The part number is ICUSB232PRO. Shouldn't cost more than 50 bucks.
  2. mike112

    VMS voice mail defaulting....

    I don't believe you can default a VMS or FMS by flipping a dip switch. You can flip some dip switches to boot the voicemail into diagnostic mode, then connect with CoSession and your can dearchive the default system database. Good luck.
  3. mike112

    CCIS

    I would agree 100% with PAVE35, your only option is number 2. However, if you could get them to shell out for new handsets the IPK II would be the way to go in my opinion.
  4. mike112

    IPK 2 Programming Software

    The SAT software is only availabe to NEC dealers, most IPK Techs do the programming thru the phone, it is much more reliable in my opinion.
  5. mike112

    Department Groups IPK II

    The problem was with the CTI LX. I had to change the Initiate Sequence to "&,X,Q" and make sure the Connect Sequence was set to "Q" I wouldn't recommend changing anything in the strings unless you are sure of what you are doing.
  6. mike112

    Department Groups IPK II

    I have an IPK V 1.60 and a small department group setup. If I transfer a caller to the department group the call hunts the way it should. However if I have the voicemail transfer a call to the pilot of the department group the call never hunts and will eventually recall back to the voicemail...
  7. mike112

    Question about KX TD1232

    I have run across a customer with a Panasonic KX TD1232. They don't know much about the system and I am new to the Panasonic line. By the description alone it would appear that this is a 12 line 32 station system. Am I correct? Are they still producing this line of system? How old is this...
  8. mike112

    NEC VMS question

    I have never run into that issue. The only time the voicemail normally says "I am sorry but I did not hear your selection" is if they are trying to dial an extension that doesn't have a mailbox in the voicemail.
  9. mike112

    analog phone, ringing non stop- elite 192 version 5 software

    There is a reset button on each of the cards. You can reset that SLI card while the system is on and it will not affect any other devices. You could also hot swap the SLI card with a different SLI card just to verfiy there isn't a problem in the back plane of the KSU.
  10. mike112

    password change on IPK, IPK2

    You can't change the passwords on IPK.
  11. mike112

    NEC Electra Elite 48

    I don't believe any of the Elite 48, 192, or IPK's will do a peg count like the NEAX. The only way I have been able to get an accurate count is to install a MIFM card and capture the SMDR data for incoming and outgoing calls. You could then print out that data on a serial printer, or connect...
  12. mike112

    Incoming call routed to three phones

    I would setup some virtual extensions in a hunt group and have the legal lines DIT to the pilot of the hunt group. Then just put the virtual extension keys on each of the three phones that you want to ring. Good Luck.
  13. mike112

    Electra Pro

    You will want to go into MB 4-1 and turn on the ringing for that particualr extension.
  14. mike112

    IPK Call Forward External

    I ran into the same problem with an IPK v1.7 and an Elitemail. I can't honestly remember what I did to fix the problem. I will look through some notes and post back if I find anything.
  15. mike112

    Electra 192 and elitemail

    If you want the buttons to be user programmable you need to assign them in MB 4-12 as FEATURE ACCESS button or FA. I believe you can have up to 16 FA buttons per phone. Good luck.
  16. mike112

    IPK II-IP Phone on PVA Card

    The IPK II system is so new that I doubt many people here have much experience with it. If you are a NEC Tech then you will probably want to post that question to the NTAC forum. Also, version 1.10 is avaiable so make sure you update your CPU.
  17. mike112

    Electra Elite 192 Config?

    TIs the AA a standard feature and is it easy to program? The AA is not a standard feature on the Elite 192, your voicemail must act as the AA. Can it also be programmed via the Station set? Should be able to but it is dependent upon the voicemail which is not NEC. Good luck.
  18. mike112

    How to Retrieve Elitemail VMP Call Logs?

    You can use the File Transfer feature in COsession to move the replog files. After you have transfered them, you can delete them off of the VMP. You can then use notepad or word to look at these replog files. I will say that looking through these logs can be an exhausting process so be...
  19. mike112

    Electra Elite Programming

    The 192 stands for the total number of ports in the system. Basiclly you have 128 phones and 64 incoming lines =192 total ports.
  20. mike112

    Electra Elite 192 Config?

    One more thing, the voicemail they have is most likely NOT an NEC voicemail. It is probably a 3rd party VM connected through on a SLI Card. Check with the VM Manufacturer.

Part and Inventory Search

Back
Top