Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. GonzoTech97

    Contact Store Win 7 64 Bit

    Thanks! is the newer version of Contact Store compatible with IPO 3.2(69) Thanks again.
  2. GonzoTech97

    Contact Store Win 7 64 Bit

    All, I am running into an issue where my customer has upgraded his PC to Win 7 64 bit (IE8) and is trying to listen to the wav files from the Contact Store interface and the sound is not coming through. IPO is 3.2(69) Contact store (Not sure but the version was current whent installed 4 years...
  3. GonzoTech97

    5420D Rel 5 Compatability with IPO 3.1.56

    Thanks amriddle01! Do they know what causes this to happen?
  4. GonzoTech97

    5420D Rel 5 Compatability with IPO 3.1.56

    Plugged the phone into the 406 and the phones downgraded. All is good. Thanks for the help.
  5. GonzoTech97

    5420D Rel 5 Compatability with IPO 3.1.56

    Also, It seems as though when I plug a new phone in, it is causing other phones to display "please wait" and then the existing phone restarts and is works fine.
  6. GonzoTech97

    5420D Rel 5 Compatability with IPO 3.1.56

    I did not see any reference in the tftp log to a phone trying to download the firmware.
  7. GonzoTech97

    5420D Rel 5 Compatability with IPO 3.1.56

    Do we need to reboot the system for the downgrade to take place?
  8. GonzoTech97

    5420D Rel 5 Compatability with IPO 3.1.56

    I have the PC that Manager is installed on as the TFTP server specified. I also have manager open when I plug in the phone. What else can I do to downgrade the phones? Thanks for the response.
  9. GonzoTech97

    5420D Rel 5 Compatability with IPO 3.1.56

    I just had a customer that purchased the 5420D Rel 5 phone sets for his IPO 3.1.56 system. When a phone is plugged up, the phone comes up and displays "please wait" and does not do anything else. Is there a compatibilty issue with this release of IPO software? Thanks in advance.
  10. GonzoTech97

    Inboud calls failing BCM100 4.0

    On my BCM 1000 4.0 with a PRI, I am getting a fast Busy or recording stating "all circuits are busy" When dialing in. When the DTI is disabled and re-enabled inbound calls resume for about 20 minutes then go down. All the while I never loose the ability to dial out. The T1 never looses sync...
  11. GonzoTech97

    Norstar System ID's

    thanks
  12. GonzoTech97

    Norstar System ID's

    Thanks... So no chance to recoup the old sys ID? The old sys ID, of course, had a PRI enabler key code associated. Any way to have a new generated without having to repurchase? We still have the old sys ID and the 24 didget keycode noted.
  13. GonzoTech97

    Norstar System ID's

    Where do the System ID's in the MISC 4.1 and later reside? What causes a system ID to change? I have a MICS cabinet that had at one time 7.1 software and the system ID noted before it was placed on the shelf. For whatever reason that 7.1 software and NVRAM were removed and used elsewhere. I...
  14. GonzoTech97

    Fortinet VPN and VOIP

    All, I have a client that is using a Fotinet VPN solution to connect multiple locations together. installed at the remote loctaions are VOIP phones and video surveillance cameras that can be viewed over the net. Main site has a Fortinet 100 with a 3 meg internet connection. Remote locations...
  15. GonzoTech97

    Message Waiting for Hunt Group Mailbox

    Curley, What happens to that call when the members don't answer the call from the voicemail?
  16. GonzoTech97

    Message Waiting for Hunt Group Mailbox

    Understood, Cook1082. I was going to add extensions without mailboxes for message indication only. Thanks again!
  17. GonzoTech97

    Message Waiting for Hunt Group Mailbox

    Thank you for your help. I think I will add an extra extension to each group, add the DN's to the alternate extension and get the light to light up when there is a message in the Group mailboxes. Thanks again.
  18. GonzoTech97

    Message Waiting for Hunt Group Mailbox

    All, I have a client that has a CCR tree set up with options routing callers to 2 different hunt groups. I have mailboxes associatied with these hunt groups. Is there a way to have message waiting indication from the group mailboxes to the phones of the members of the group? Or is a there a...
  19. GonzoTech97

    Main number call flow help

    All, I have a client that would like the following to occur when a call comes in to the main number: 1. Calls to the main number are answered by the auto attendant. 2. When 0 is pressed, the call is to be directed to the Operator at 1300 for 4 rings. 3. If the call is not answered then the...

Part and Inventory Search

Back
Top