Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mushrog

    What is Callback_ans Pls ??

    I have a Starplus with a DHS 7312 at ext 10. IF I touch a CO line button to make a outside call I get 2 beeps and this is displayed. We did F4 to remove DND, and have done F*91 to cancel any call back possibly on. Nothing works, and this phone can't make any outside calls.
  2. mushrog

    Call Waiting from the LEC

    Thanks guys, from an old Bell Head. Now I know what it's called and how to program.
  3. mushrog

    Call Waiting from the LEC

    Isn't there some way to put a flash button on sets to accept call waiting on the CO Lines? I find no mention of a feature code, but I found one display of a flash key on a set diagram. It is a MICS version 30ARE05 NAT and I am trying to put the buttons on 7310 sets.
  4. mushrog

    Lost telephone display of messages old and new

    It was a back-up from the card done last November.
  5. mushrog

    Lost telephone display of messages old and new

    I thank you guys for the help, but the only way I could fix it was to re-load from a old save. Then again make the changes I wanted in the first place. I don't know what happened, but am thankful I save with regularity. Thanks again for the suggestions. Mushrog
  6. mushrog

    Lost telephone display of messages old and new

    To Touch Tone Tommy, Finally had a chance to try this. No Joy To Merlinman, Please explain what you did with Board Renumber
  7. mushrog

    Lost telephone display of messages old and new

    More problems with this Magix 4.0 and Messaging 7.0. While attempting to fix my prior problem I shut down the system and reseated the Messaging. Before I did all the 44xx sets had a message in their dispalys telling how many old and new messages each set had. That is now gone. I can't find any...
  8. mushrog

    Merlin Messaging won't play night message

    I figured out what was causing the problem. I had three consoles, only one of which had night a service button. The other 2 have to be in night service also, even though they have nothing to do with the Auto Attendant. I assigned them buttons, put them in night service and control the whole...
  9. mushrog

    Merlin Messaging won't play night message

    I have Merlin Messaging integrated into a Magix. It is set to be switch controlled. We are only using AA number one. It has both day and night messages recorded. It responds to extension transfer and all prompts, however it will not play the night message when the button is pushed at Attendant...
  10. mushrog

    Fax won't work on Legend 3.1 with Messaging.

    I can't. In a cost cutting effort it is the main telephone number for voice also. They moved from single line sets where this worked well. They don't want to change any phone numbers.
  11. mushrog

    Fax won't work on Legend 3.1 with Messaging.

    My customer moved into a Legend 3.1 with Merlin Messaging. I added a 008 GS/LS ID module for CID. They have 2 copper Loop Start Trunks. I changed the AA to delay to allow CID info to arrive. The fax was on trunk 1 in front of the Legend working on a ComSwitch, but we had to modify it to allow...
  12. mushrog

    On Hold Call makes no sound.

    Thanks gforce9, that was the ticket. I never thought it wouldn't already be turned on. Mushrog
  13. mushrog

    On Hold Call makes no sound.

    Thanks gforce9, I will let you know the results. mushrog
  14. mushrog

    On Hold Call makes no sound.

    Last June I replaced a CICS hit with lightening with a CICS 7.1. Now the customer says that a call placed on hold does not beep at the holding station to remind them of the on hold call. They say the old system did. I can't find anything in the book. I would have thought this was a normal system...
  15. mushrog

    This call pilot is driving me nuts

    You guys are all great. I don't know which idea, short of the upgrade, worked but it is up and happy now. That makes me and the customer very happy. Thanks guys.
  16. mushrog

    This call pilot is driving me nuts

    I started a new thread. I have a MICS 7.1. I have a Call Pilot 3.1, release 31.10.14.22. It is fed by copper loop start trunks. It started when the Call Pilot would send calls to wrong extensions. The caller knows the extension, read user. Now I can't get the VM to answer a call sent to it by...
  17. mushrog

    Call Pilot AA calling wrong extensions

    Thanks for the ideas. I am going by today and will find version.
  18. mushrog

    Call Pilot AA calling wrong extensions

    I don't know what release it is. It's about 2 years old. How do i find Out? Today my customer called to say the VM is taking up to 20 rings to respond. I need to get by and try to set up BLF buttons to check the status of the ports.
  19. mushrog

    Call Pilot AA calling wrong extensions

    The Call Pilot is "If you know your parties extension ..." Some times an extension is put in and a completely different extension receives the call. I suspected fat fingers on a cell phone, but this has happened to users themselves, and wives who know the extension they want. No this is not a...
  20. mushrog

    Call Pilot extensions calling

    Thanks for the input guys. Yes this is related to my other post. I was attempting to trouble shoot the problem, and found this out. Sorry i am so long in responding.

Part and Inventory Search

Back
Top