Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. MagnaRGP

    NTDK70BBE5 help

    E5 (or E6) means RoHS compliance.
  2. MagnaRGP

    Placing on hold from one phone - picking up on another - XHA/SCR?

    Try putting cls POA on two of the sets and test. This is Privacy Override Allowed (Denied). Put that on all sets and you should be good to go.
  3. MagnaRGP

    3.0 upgrade to 5.5 card compatibility ?

    Disregard previous post....just read that it's an 81C. IPE shelves don't need MGC's.
  4. MagnaRGP

    3.0 upgrade to 5.5 card compatibility ?

    You only need the MC32s if you are encrypting your speech. Otherwise a bog-standard MC32 works just fine. You will need DSP resources however in the upgrade to 5.5 if you have more than one cabinet/chassis but they should probably be spec'd in as DSP daughterboards on your new Media Gateway...
  5. MagnaRGP

    ITG-Dongle

    You also can't simply do a hot-swap as both IP Line and IP trunk will require re-configuration of the node with the ELAN MAC Address of the card installed.
  6. MagnaRGP

    Telephony Resources does not load in BCM Element Manager

    I'd suggest installing the latest SU (both system and desktop) and then installing the latest version of Business Element Manager.
  7. MagnaRGP

    BCM 400 3.6 Backup issues

    when you enter the credentials in the BCM to access the shared folder you need to add: \\domain name\domain username (possibly without the leading "\\" -- I forget) as the username domain password as the password
  8. MagnaRGP

    BCM 4.0 Alternate route Absorbed digits

    Good day all. I'm trying to finesse routing on a BCM 4.0 (SU14 latest patch)to allow calls to an extension at another site to fail to the other site's main PSTN number if all VoIP trunks are busy. I know about building a routing service etc. The issue is when I attempt to add alternate routes...
  9. MagnaRGP

    Integrating BCMs with Cisco Call Manager

    I have a customer who is ripping out all of their Option 11s (3.0) and replacing them with a Cisco Call Mangler. This is occuring over multiple sites across Canada. Yes, yes I know.... Anyway, their smaller sites have BCM 400s (mostly 3.7) and they intend to keep them. Currently they have...
  10. MagnaRGP

    Error messages Rls 5.5, 81c

    @chintoo: "Any more advice?" Yes. start your own post instead of taking over zardari42's.
  11. MagnaRGP

    1000b to 1000b calls

    No voice media path means you have a network issue. Speak to the network folks and tell them that every IP set at every site needs to be able to speak with every IP set at every other site.
  12. MagnaRGP

    All TNs disabled on VGW card

    @Tman45 -- CS1000 4.5 = no MGCs. MC32s or ITG-Ps only. Check your ELAN cables and double-check the ELAN/TLAN adapter is secure. It could be a bad adapter.
  13. MagnaRGP

    CS1000 Media gateway unexpected reboot

    The ONLY downside to using IPMG in loop 0 0 is that you will lose 1 dsp on the 32 port DB on that MGC. You can't have a DSP in TN 0 0 0 0. There were issues early on with CC6 not liking 0 0 X X TNs but they seem to have gone away. I try to start at 4 0 if building from scratch, but any DB...
  14. MagnaRGP

    IP TRUNK 3.0 HELP

    1. MC32 cards don't use A DCHIP card. They are for ITG-P cards. 2. An SSC card running 5.5 only supports TDM. 3. IP Trunk 3.0 will not work on MC32 cards.
  15. MagnaRGP

    Cs 1000E CPPM Sig Server tools menu on bootup

    You will need a 512mb CF card.
  16. MagnaRGP

    Strange (?) error on BCM 3.7

    That's kind of what I was thinking, but I would like to try to avoid the re-image if possible. Do you think a platfor init might resolve the issue? Thanks.
  17. MagnaRGP

    Strange (?) error on BCM 3.7

    Have any of you seen these errors on the alarm banner on a BCM 3.7? It comes up as component ID GenPort and error ID 22, but I can’t find that ANYWHERE in docs or in Knowledge base. These come up about 5 times every few seconds and within 5 minutes of warm reboot, the BCM has over 10000...
  18. MagnaRGP

    MCR Analog/IP on Multiple Switch System

    Use GHTrouts idea. When someone calls the IPset, PCA will dial another DN which is CDP'ed to the Branch system and will ring the analog. Simple and effective.
  19. MagnaRGP

    message forwarding rule

    After configuring the rule in CP Manager, you can dial 8 0 4 1 to turn it on when logged into the mailbox.
  20. MagnaRGP

    call pilot 1005r

    tnphoneman is right. How much would your vendor have charged you if you called them to come out and fix it if it DIDN'T come back up? Would your IT folks be happy if you told them you would reset the domain controller by hitting the reset button?

Part and Inventory Search

Back
Top