Hi
Dear Abdulrashid
I did it on X8 system but on 3800 device I could get report only through serial port I can't get report through lan port is it possible?
Best regards
Hi everyone
Please help me. what to do on the OpenSqape x8 device with the OCCLA module to have a signal on the Optipoint500 phone. The Openstage phone is active, but
Optipoint500 is inactive
Best regards
hello Sir
Thank you for your reply
I installed the Accounting Manager software but I don't have the call log. Please help me how I could configure Call Charge.
Hi everybody
I have 2 question.please help me.
1 How can I have call log in openscape business X8 V3 with board OCCLA?
2 How can I have a report of what function each admin connected to the mentioned device performed on the device?
Best regards
Thank you very much for answering my question
Regarding questions:
Internal calls and voice on the E1 link were not sent or received unidirectionally
Did not check RTP
There is no problem regarding IP communication in the network.
We don't have a firewall either
hello everyone
Please help me. I have a question.
On an Openscap OS4K V10 device
In SIP subscribers, sometimes I have sound and sometimes I don't have sound. What is the problem? Please advise.
best regards
Hello everyone
I have two questions.
To install OpenScape Business S on this part of Suse Linux Enterprise
It asks me for username, please tell me what should I enter.
The second question is what are the additional software that I need to install
Thank you for your help.
Best regards...
Hello everybody
I want to have phone book in OSB X8.
When the dispatcher makes a purchase through the computer by clicking on the dial. Please help me what to do.
Best regards.
Hello everybody
Sorry , I have a question
In OS4K V10, how to find out which internal subscriber called a trunk in another center at a specific time and date, for example, a week ago?
Best regards.
Hello dear SBCSU
Thank you very very much.
with the command (ADD-WABE:CD=**8,DAR=VOICECAL,CHECK=N)
Now the speaker call is activated.
Dear Mr.Moriendi thank you for your advice.
Best regards
....................
CHANGE-SDAT:STNO=4030,TYPE=ATTRIBUT,AATTR=VC;
(active VOICECAL...
Hello dear SBCSU
I did exactly as you instructed. But I still have that German alarm. Speaker call and dialing is impossible
......
CHANGE-FUNCT:SLANG=ENG;
CHANGE-SDAT:STNO=4030,TYPE=ATTRIBUT,AATTR=VC;
DELETE-ACTDA:TYPE=STN,STNO=2135,FEATCD=VCR;
ADD-WABE:CD=#80,DAR=SPKRCALL,CHECK=N
Best regards
Hello Dear SBCSU
When At 4030 Dial VOICECAL code *80 I have this alarm in attachment
Bssts regardhttps://files.engineering.com/getfile.aspx?folder=da0f66c8-0a57-4623-9979-74774caa0184&file=20240201_131817.m4a
Hello Dear SBCSU. SORRY
I activated the VC in SDAT.
chat-sdat:4030:attribu:vc
add-wabe:cd=**6, comspk,, check=no
When I tack **6 i could not page the 2135 station user. it's not posdible
Best regards
Hello everybody
I have a question.
Phone Deck400 t
The right side has 16 keys. According to the std document it should be 110. Only 8 keys can be defined. What should I do to configure 16 keys?
Thanks
I have another problem in OS4K V10 is when I try to transfer calls from panasonic analog phone with flash key the call disconnects with the first person. When I set analog subscriber PTIME to 1 in CCTINDX, it plays music for the caller, but after transferring the call, the call does not go...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.