Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. kwtaylor

    NXB100, System Programming Location? Harddrive or Memory?

    That's what i thought... was hoping someone would tell me i was wrong.
  2. kwtaylor

    NXB100, System Programming Location? Harddrive or Memory?

    Hey folks, I have an NBX100 that i may need to replace the harddrive on and wasn't backed up. Is all the programming on the harddrive or system memory?
  3. kwtaylor

    Reduction of Inbound Calls from PRI

    Groovin' Thanks for the help, planning on site visit next week to perform clean-up and modify phones to cap out these calls.
  4. kwtaylor

    Reduction of Inbound Calls from PRI

    OK, verified no ACD. The main line 3230 is set as a MCR on 15 phones (no hunt group), a call come in all 15 phones ring at the same time until the call is answered. If another call comes in the remaining 14 ring and so on... If I set 3230 to SCR they will only receive one call until it is...
  5. kwtaylor

    Reduction of Inbound Calls from PRI

    I believe directly to DN's (verifing) but in don't want to remove the line from all spare phones.
  6. kwtaylor

    Reduction of Inbound Calls from PRI

    Greeting Folks need some help... I have an office w/ a PRI that was recently reduced in size. I need to reduce the number of inbound calls from the main number into the office now because staffing can't handle the call load. We use to have 15 people and now down to 4. I would like to cap it out...
  7. kwtaylor

    Need an NBX 100, Support Vendor in Chicago

    Greetings Folks. Can any provide me the name(s) of an NBX100 vendor in the Chicago area. I just lost mine.
  8. kwtaylor

    Question: Regarding Backup and Download of Shoretel Voice Switches

    Greetings all. Question, Is there a way to backup a switches configuration (i.e. a site with a 120/24 switch operating on a PRI) and then download it onto another in the event of a catastrophic failure of my equipment or would I have to reprogram a new one from scratch.
  9. kwtaylor

    Patch cord/cables go bad over time causing system to act erratically

    I suspect your 4300 is going bad and burning your cables up. Open up those bad patch cables and look for a bare spot or a burn mark, sure it's only suppose to low voltage going down the line but if the transformer is gone it's no longer regulating what is being produced. If you find a burn spot...
  10. kwtaylor

    Patch cord/cables go bad over time causing system to act erratically

    Based upon your finding I would say your 4300 is going bad. I suspect that it's supplying more power than it's supposed to be and burning your cables up. Do you have another unit to swap it with? One way to confirm that is what is going on is to cut open a patch cable and inspect the pairs from...
  11. kwtaylor

    Minimum Software Release for to Send Outbound Caller ID, NBX100

    Got it resolved, carrier missed a setting. Thanks for the offering of help.
  12. kwtaylor

    Minimum Software Release for to Send Outbound Caller ID, NBX100

    Greeting Folks, what is the minimum software release required on a NBX100 to be able to send customized Outbound Caller Id.? I'm currently operating on R4_3_17. When I run the test in the dialplan, my CLI Outbound Pretranslator is saying all is configured correctly. But when i perform a live...
  13. kwtaylor

    Automatic Inbound Call Routing (Dealing with Prank Caller)

    Thanks for clarication all; I guess I have to think of a another way to build this mouse trap. :)
  14. kwtaylor

    Automatic Inbound Call Routing (Dealing with Prank Caller)

    OK, so I'm understanding this correctly the coversion is the changing of the targeted number ie my staffs extension. Not a conversion of the inbound phone number 323-523-7456 being recogonized and then translated to be routed to a desired destination.
  15. kwtaylor

    Automatic Inbound Call Routing (Dealing with Prank Caller)

    This can't be accomplished via LD 49?
  16. kwtaylor

    Automatic Inbound Call Routing (Dealing with Prank Caller)

    Hey Folks, How do I go about getting an Inbound call from a known number (323-523-7456) routed to a particular extension. I've got some kid calling in pranking my staff. I have his phone number from Caller Id and would like to program the system to Automatically Forward or Route his calls to my...
  17. kwtaylor

    PC to VT100 "F" Key Mapping

    Can anyone tell me how the F5 key is mapped (programmed) to use the Find Function in Mermail? I need to run a user report my vm remotely and my PC F5 key isn't programmed to use that feature.
  18. kwtaylor

    unable to received calls to a forward extensions

    Post your TNB I suspect it's a simple CLS issue.
  19. kwtaylor

    Error Message Help - Book no Help

    Thanks for the clarity, I disabled a bunch of old ground start trunks (cards) that I don't believe are in service anymore. Probably where it's coming from, if no one hollars i'm going to take them out in a few weeks.

Part and Inventory Search

Back
Top