Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. derfloh

    9.0 Call Control FNE 00 cant break dial tone

    Check in SysMon if IPO receives DTMF
  2. derfloh

    User Portal - Remote Access through ASBCE

    I would configure it as a reverse proxy configuration. You will be able to see the traffic in traceSBC with HTTP monitoring enabled. If the requests are forwarded to IPO you have to watch the SysMon trace with default filters plus http and DNS.
  3. derfloh

    Workplaces not able to switch between "This Computer" and "Desk phone" (Sometimes)

    I agree that it sounds like a firewall issue. If not maybe asymmetric routing or a NAT that breaks things.
  4. derfloh

    User Portal - Remote Access through ASBCE

    Does it work internally?
  5. derfloh

    9.0 Call Control FNE 00 cant break dial tone

    Without a matching DID as far as I know the call will declined. For me it sounds as if the IPO doesn't receive DTMF tones.
  6. derfloh

    Twilio SIP trunk setup on Avaya IP Office 9.0

    Without details... No! Who is sending the Bye?
  7. derfloh

    VM Pro Not Seeing IIS Installed

    Why not move to application server? It has all needed on board.
  8. derfloh

    Avaya IPO R11.1.3.1.0 build 34 w/ UCM Module and ASBCE 10.2.0.1-89-24401

    I use reverse proxy for 1XP as well. How do you have application relay configured? Do you see incoming packages hitting the SBC? You can test as root (or sudo su) weg the following command: tcpdump -nnn -I B1 port 9443 (when the public facing interface is B1)
  9. derfloh

    IP Office 500 v2 - T1 Trunking

    You need to have a valid account and the right to load the files
  10. derfloh

    AVAYA IP Office R12 using Softconsole for Operator

    As Workplace IS an Avaya Client, this will not be the root cause. Nevertheless try to load the settings file with your browser.
  11. derfloh

    AVAYA IP Office R12 using Softconsole for Operator

    What did you enter as config URL?
  12. derfloh

    Change firmware handset Ascom d43 to Avaya 3730

    No. If you find a way though, please share 😉
  13. derfloh

    IPOSE 12.0 deployed on VMWare

    Thanks for sharing.
  14. derfloh

    Caller ID (CLID) Not Passing to Twinned Phone with SIP

    You can watch a SysMon race to see what Gassigehen. But I guess the name handling in this case is hard coded.
  15. derfloh

    Caller ID (CLID) Not Passing to Twinned Phone with SIP

    There is a system wide option "forward original number for twinned calls" or similar.
  16. derfloh

    Avaya IPO Virtualization

    Did you create two threads...
  17. derfloh

    We need technical support migrating Avaya IP Office SE from physical server to VM

    Did it once. Using the backup/restore procedure didn't work for me. So I migrated everything manually but it worked well.
  18. derfloh

    R11 Can Individual Analog Ports Be Disabled on a ANALOG POTS30V2 Expansion Module?

    Just remove the corresponding users and they will all be NoUser with it's restrictions.
  19. derfloh

    IPOSES 11.1.2.4 with J-Series phones using TLS thru an SBC - 46xxspecials

    You should have somthing like this in your 46xxsettings.txt SET SIP_CONTROLLER_LIST 192.168.42.1:5061;transport=tls In your 46xxspecials.txt within the Workplace section (acm/acw/aci/aca) place this then: SET SIP_CONTROLLER_LIST 192.168.42.1:5060;transport=tcp The last entry the endpoint gets...

Part and Inventory Search

Back
Top