Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. allworxguy

    Faxing over Residential POTS lines via All-In-One Devices

    The medical world around here still uses faxing of prescriptions to pharmacies. Email would be smarter but not a valid method. Marv ccna
  2. allworxguy

    Internal Dialing Correct, Calling Through AA With Extension Swapped, Mailboxes Swapped

    Let me explain how the system and voice mail function. Calling a DN from another DN, the system rings the port associated with that DN. Simple When dialing into a voice mail Auto-attendant the caller is actually dialing the mailbox. When dialing mailbox 228 the DN associated to the MB (ext254)...
  3. allworxguy

    App isnt allowing me to transfer that call

    Are you calling the the site number in the app from site? PRI trunk to trunk transfer might be blocked by the telco. Try putting the number in the app and cAlling from from your cell. Marv ccna
  4. allworxguy

    Nortel CICS Line card

    1st. CLID needs to be enabled at the CO. It can be verified by using a POTS line phone with Caller ID capable. Caller ID is transmitted between the 1st and 2nd ring. 2nd. CLID needs to be turned on for each line in LINES > TELCO FEATURES 3rd. The phones you want to display Caller ID...
  5. allworxguy

    Nortel CICS Line card

    You may have to set the DIP switches for your country. Marv ccna
  6. allworxguy

    new ip set registration on new system error

    Is it possible the 1140e has a vlan set in it's config? This will stop connection, but will allow S1 and S2 to be populated and the the set to geet an IP address. Scroll through the entire terminal setup the vlan setting is near the end. Marv ccna
  7. allworxguy

    Issues with BEM - caused by new Java updates

    A windows update wll create a restore point to just before the update. You can try the restore and see if that fixes it. Marv ccna
  8. allworxguy

    OneAccess One425

    Try this: 1. Once connected to the console of the device using OneAccess console cable. Press <ESCAPE>, then <CTRL>+Y and finally <CTRL>+N. 2. You will be prompted whether you want to factory reset the device. Type 'Y' for yes. 3. You will then be asked if you would like to reboot the router...
  9. allworxguy

    NORTEL 6X16 C6 QUESTION

    You should move the cross connect at the dmarc and the C-6 module, not the mod cords. Marv ccna
  10. allworxguy

    Moving General Delivery Mailbox - Message Waiting etc.

    Simply put DN 225 as the ext for mailbox 100. If DN 225 has a mailbox already associated you will have to delete it first. Marv ccna
  11. allworxguy

    Call Pilot 150

    Caller dials 9 to change to ALT language. Marv ccna
  12. allworxguy

    m7310

    ??? Marv ccna
  13. allworxguy

    Utility Pole

    Wonder if the street light works. Marv ccna
  14. allworxguy

    No Sound Or Audio On Phone System

    Does this happen to and from all phones? Marv ccna
  15. allworxguy

    QCBIX5A

    Typically cables are punch onto the back of a BIX1A and the feed to the back of a 5A or 7A. Then you cross connect from the the 5A front to the cables on the 1A. If you need more than 5 connections you can bridge the 5A sections together on the back. Marv ccna
  16. allworxguy

    Cannot transfer

    not sure on the number of intercom buttons - would that restrict ability to xfer? Absolutely. You need a free I/C path to transfer. So if your calls appear on and I/C button you need a 2nd I/C to make a transfer. If call is on a line button only 1 I/C is needed on the phone. Marv ccna
  17. allworxguy

    nortel dmc320 can't connect to system

    DMC320 connection protocol Baud: 115200 bit/sec. Data bit: 8 Parity: None Stop bit: 1 Flow control: Hardware: DCD, DSR, DTR, CTS, RTS Null modem cable Marv ccna
  18. allworxguy

    How To: Reject a call

    You can also try F984 (call forward to voice mail) as an option. Marv ccna
  19. allworxguy

    CICS 6.1 integrated CCR ringing before answer and timeout when no number chosen

    The splash ring you are hearing is caused by Delayed Ring Transfer (DRT). It occurs when no phones are programmed to ring. By default the DRT is set to PRIME. You'll fine the PRIME set for each line under LINES programming, change them to NONE. Alternately you can change DRT from PRIME to NONE...
  20. allworxguy

    Abandoned POTS calls still ringing Hunt Group on BCM50

    You can "hear" the disconnect from the CO. Put a butt set on the line in monitor mode. A few seconds after the far ends hangs up you will hear a buzz as the disconnect signal is sent from the CO. Marv ccna

Part and Inventory Search

Back
Top