Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Toolhead2

    Wont allow messages

    Virtual, because there is no actual telephone. Only the voicemail box itself.
  2. Toolhead2

    Wont allow messages

    1644 shows as normal... GENERAL_DELIVERY,MB 1000 General Delivery Change Activity Reset Password SYSTEM_MANAGER,MB 1002 Administrator Change Activity Reset Password EILEEN,HOFMAN 1640 Subscriber Change Delete Activity Reset Password LISA,NEDERLAND 1641 Subscriber Change...
  3. Toolhead2

    Wont allow messages

    Yes 981,log:mbox#+password The Extension is 1644 Target line 255 is set to receive digits 1644, no prime set, no clid set.
  4. Toolhead2

    Wont allow messages

    We have a Callpilot 100. Version 1.5.32.01. We have a mail box that is virtual. 1644. The local admin person has gone in and set up the greeting. However the box still says its un, initialized when called. Any ideas ?
  5. Toolhead2

    Meridian Voicemail

    What is the Mermail telling the user when they put in there DID or 2288 ? Has this voice mail box ever worked and just stopped working ?
  6. Toolhead2

    Meridian Voicemail

    What happens when they call into the pilot number of the voicemail ?
  7. Toolhead2

    4610 BOOT UP

    I cleared the cache. It is getting its ip through DHCP server. That seemed to do the trick.
  8. Toolhead2

    4610 BOOT UP

    We are on an S8700 server. An existing phone that just had the ext changed , is sitting at "FINDING ROUTER" then tries to boot up but never does successfully. Any ideas as to why? And what can be done to get it to the login screen ?
  9. Toolhead2

    Calls not ringing

    SITE DATA Room: Headset? n Jack: Speaker? n Cable: Mounting: d Floor: Cord Length: 0 Building...
  10. Toolhead2

    Calls not ringing

    I have an issue with ringing this time around. Again on a S8700, G700. x7925 has bridge appearance of x7926. x7926 is an existing 4610 set. x7926 is Btn 2 on the x7925, below x7929, which is Btn 1
  11. Toolhead2

    STRAIGHT TO VOICEMAIL

    I made the changes to x7874, and to x7925 as you suggested. It works now. Many thanks.
  12. Toolhead2

    STRAIGHT TO VOICEMAIL

    Those are the stations they wanted me to set up bridged appearances for 7929. So that checks out.But if that is correct then it seems we have an issue.
  13. Toolhead2

    STRAIGHT TO VOICEMAIL

    BRIDGED EXTENSIONS Ext Principal's Buttons 7874 3 7925 2
  14. Toolhead2

    STRAIGHT TO VOICEMAIL

    GENERAL STATUS Administered Type: 6408D+ Service State: No hardware assigned Connected Type: N/A Parameter Download: pending Extension: 7929 SAC Activated? no Port: X User Cntrl Restr: none...
  15. Toolhead2

    STRAIGHT TO VOICEMAIL

    So your saying it looks correct ?
  16. Toolhead2

    STRAIGHT TO VOICEMAIL

    Basically it looks like this : STATION INSIDE CALL OUTSIDE CALL ACTIVE n n BUSY y y Don't Ans y y All n n Goto Cov y y...
  17. Toolhead2

    STRAIGHT TO VOICEMAIL

    Coverage Path Number: 3 Hunt after Coverage? n Next Path Number: Linkage COVERAGE CRITERIA Station/Group Status Inside Call Outside Call Active? n n...
  18. Toolhead2

    STRAIGHT TO VOICEMAIL

    Coverage Path Number: 3 Hunt after Coverage? n Next Path Number: Linkage COVERAGE CRITERIA Station/Group Status Inside Call Outside Call Active? n n...
  19. Toolhead2

    STRAIGHT TO VOICEMAIL

    What is the command to display the coverage path ?

Part and Inventory Search

Back
Top