Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jimbob21

    Blank telnet session when connecting to 2950

    Tried your suggestion. No go. I have 3 spare switches. 2950-24port(blank telnet) 2950 -48p and a 3550. So I wouldn't confuse the switches half way through I set 2950-24 as .115 and the others .116 and .117. I'm missing something. Another gentleman suggested going through the OSI. While I...
  2. jimbob21

    Blank telnet session when connecting to 2950

    Added line - transport input telnet - to VTY config with zero results. In the cmd window I input telnet 10.1.1.115 It connects and shows window - Telnet 10.1.1.115 Page is blank and won't accept any inputs which is the same on the last I don't know how many attempts. My son's shirt says "My...
  3. jimbob21

    Blank telnet session when connecting to 2950

    The DHCP is on a seperate server. The IP on my workstation is dynamic. Port shows active. Can ping switch. Pinging 10.1.1.115 with 32 bytes of data: Reply from 10.1.1.115: bytes=32 time=11ms TTL=255 Reply from 10.1.1.115: bytes=32 time=1ms TTL=255 Reply from 10.1.1.115: bytes=32 time=1ms...
  4. jimbob21

    Blank telnet session when connecting to 2950

    missed the reply sorry viper. I'm consoled in trying to get telnet to work before I configure it for production. My son's shirt says "My daddy can fix anything." Now that's a lot to live up to.
  5. jimbob21

    Blank telnet session when connecting to 2950

    btw - the configuration I'm entering is basically what you see below. I've tried different variations that work on other switches but don't on this peta. I'm sure it's something I'm missing. int vlan1 ip add 10.1.1.116 255.255.0.0 no shut ip default-gateway 10.1.1.1 username admin password...
  6. jimbob21

    Blank telnet session when connecting to 2950

    Nada, No go. Restored to factory. Entered new configuration. I'm over it for today. I've programmed this thing so many times I don't know if any of it is right or not anymore. Weird thing is I have 2 other spares of of different types switches and they all work with the configuration that I'm...
  7. jimbob21

    Blank telnet session when connecting to 2950

    I have not but I'll try that and get back to you if it doesn't work. My son's shirt says "My daddy can fix anything." Now that's a lot to live up to.
  8. jimbob21

    Blank telnet session when connecting to 2950

    Forgive me for being lazy and asking. How do you check the speed and configure if it's incorrect? Also, curious - what file would that setting be stored in? My son's shirt says "My daddy can fix anything." Now that's a lot to live up to.
  9. jimbob21

    Blank telnet session when connecting to 2950

    I have a CISCO 2950 EI. IOS is (C2950-I6Q4L2-M), Version 12.1(20)EA1a, RELEASE SOFTWARE (fc1) I've reconfigured it countless times but always end up with a blank page when trying to telnet in. It appears to also not accept any inputs. Has anyone else run into this before and know of a solution...
  10. jimbob21

    Updating IOS on 2950 EI

    I'm going to end this thread and create a new since the problem has changed. My son's shirt says "My daddy can fix anything." Now that's a lot to live up to.
  11. jimbob21

    Updating IOS on 2950 EI

    printed out the config. it added the line aaa new-model aaa authentication login default local aaa authentication enable default enable when it wouldn't accept it the first time I typed it in as aaa new <CR> Still can't telnet in. Time to crack open some more books. My son's shirt says my...
  12. jimbob21

    Updating IOS on 2950 EI

    Vipergg, thanks for the reply. After I typed this I had a "doh" moment about the password. I was so frustrated about the telnet problem since I had been looking at it so long I completely over looked it. Thanks. As for the telnet issue and your new lines - it may be due to the IOS version of my...
  13. jimbob21

    Updating IOS on 2950 EI

    Alright. Thanks you guys for the help so far. I've decided to currently forget from trying to load from the console port since the run time is over 2 hrs. I've wasted more than that already though. I'm currently pulling whats left of my hair out. For whatever reason that I can't find - I can't...
  14. jimbob21

    Updating IOS on 2950 EI

    Hi guys, I have a refurbished 2950 that I'm trying to update the IOS on before I program it and put it in production. I've googled the heck out of this question and haven't found an answer. I found other answers but they currently don't work with my current plan. Granted I may have to change...
  15. jimbob21

    How to segment a private network

    Vince, you the man. This may be too nitpicky but I'd rather know how to do it right from wrong. Since what I'm using is 48 and 24 port switches and dividing the VLAN's (like we discussed above) by switch would you agree that using a subnet of 255.255.255.192 or .224 is better than using a .0...
  16. jimbob21

    How to segment a private network

    I saw the HUH?HUH? and started cackling.. In the DHCP it's set to exclude outside specific ranges. So when I tried to add a new inclusion for testing it denied me because it was outside the current subnet range. So then I googled the error to determine what I could do to correct it for my...
  17. jimbob21

    How to segment a private network

    Another add on question that I just ran into. My current subnet mask is 255.255.0.0 What are the negative affects of changing in the DHCP the subnet from the above to 255.252.0.0 or even 255.0.0.0 to allow for the 2nd digit to denote the floor in the range I'm planning for. 10.0.0.1 -...
  18. jimbob21

    How to segment a private network

    I wanted to add. Thanks to both. I'm learning a lot and appreciate it.
  19. jimbob21

    How to segment a private network

    That was excellent post for sure. Our printers are static due to applications that run critical jobs on our system. Wish I could get around that. I had a similar plan as far as the VLAN arrangement. 10.building.floor-switch.node or 10.2.32.xx. The reason is we have up 2-3 switches on each...
  20. jimbob21

    How to segment a private network

    Just want to make sure I get this straight. So what I think your saying is that I could leave the printer ports on the default VLAN1 and configure the other ports on the switch with their new VLAN's to segment each floor? Which most likely means I'll have to configure each of the switches...

Part and Inventory Search

Back
Top