Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. monkey101

    Avaya Aura and Spectralink SIP Dect

    Hey All, Just curious if anyone out there running Aura with Spectralink SIP DECT phones and is recording the calls. Just curious if you are doing it via the Aura and how.
  2. monkey101

    RAN route issue with multiple trunks in route

    Hey All, I have a RAN route that has 2 members in it. For some reason I can only get member 1 to play the second call gets ring back until the first one is done. I have a message recorded on the Interalia on both ports that the trunks terminate to. Not sure what I am missing. Here is my route...
  3. monkey101

    BCM multi image harddrive

    I was able to finally copy it using easeus but found if I went to a 2.5 320 GB it would work but I found a old 160 gb HDD and worked no problems. I have a few kicking aaround so I will be in good shape now. Thanks for the input
  4. monkey101

    BCM multi image harddrive

    Hey All I am down to my last bcm multi image hard drive. I still have about 60 bcm to look after and wanted to clone a few copies of the hard drive as they are getting harder to get. I tried and it didn't work. Anyone have any luck doing it and was there anything special you had to do?
  5. monkey101

    equipment buyers

    thanks all...i found a local vendor that just happened to be in need of what I was selling and did pretty good on it
  6. monkey101

    equipment buyers

    Hey All Just reaching out to see if anyone has any good sites for people who buy equipment?
  7. monkey101

    BCM50e New User Questions

    It sounds like you are getting intercom dial tone and when you try to dial out you are dialing starting to dial something that is not in the extension range. Easy test is to try dialing an extension and see if that works and if it does you will just need to dial the pool code for the pool...
  8. monkey101

    bcm 450 r6 image

    OMG I can't belice I was 200 baud out....lol sure can twll I was having a day yesterday. I will have to try buying another multi version drive as this was trying to get some stuff ready if one of our 40 or 50 bcm dies in the middle of the night with a bad hdd.
  9. monkey101

    bcm 450 r6 image

    Is there a way to download the keycodes off of a working bcm for that machine or is the only way to go through krs?
  10. monkey101

    bcm 450 r6 image

    Thanks for all the help. What I wanted to do won't work. I also remembered that the software get associated with teh system base tray so I couldn't use a hdd from another system and just restore the backup on it like I was hoping. Anyone happen to have a copy of the 450 r6 software and patches...
  11. monkey101

    bcm 450 r6 image

    Well don't I feel like a NOOB. There was an old IDE 8oGB hard drive sitting on the top shelf of the BCM not connected to anything and I figure the guy I work with had disconnected when doing other work on the unit. That makes things way easier than....lol. Can you tell I haven't taken one apart...
  12. monkey101

    bcm 450 r6 image

    Is there a particular IDE to SATA converter that should be used or any old one will work?
  13. monkey101

    bcm 450 r6 image

    thanks all for the info
  14. monkey101

    bcm 450 r6 image

    Just curious if any one has a copy of bcm 450 r6 software. Sent the money on the multi image drive and it was blank when I got it....dam ebay scammers Also can I just use ghost or something like that to copy the image off a working bcm and then just restore my backup?
  15. monkey101

    T7406e questions and issues

    It has been a real long time since I worked on a Norstar. I have 2 T7406e sets and 1 base station. I registered one set and tested it fine. I registered the second set and it had said no ksu resource or something like that. I made sure they were both on 2 different ports 1 and 3 and then found...
  16. monkey101

    CS1K with QSIG to Mitel not passing tones to WAT paging trunk

    I have tried that already and when I put the SUPV to yes the cs1k cannot access the trunk.
  17. monkey101

    Mitel Connected to Avaya CS1K via QSIG trunks and not passing dtmf after connecting to paging

    I have an avaya cs1000 with a valcom paging system and a mitel system connected up via qsig to the cs1000. I can dial the access ode and get the paging trunk but cannot dial the zone. This is cross posted to see if any mitel guys had run into this.
  18. monkey101

    CS1K with QSIG to Mitel not passing tones to WAT paging trunk

    I have a 7.6 cs1k that has a QSIG going to a mitel pbx. From the mitel you can dial the trunk access code of the wat route for the paging trunk but cannot dial the zone. If i dial from the mitel to csk set i hear the dtmf so i am figuring it has to do with trunk to trunk transfer. I am not sure...
  19. monkey101

    importing changes to cct

    Hey All I am trying to import changes to a couple of agent sets to CCT. I deaquired the dn's in CC then made key changes and then took the print out of it. I opened the CCT console and clicked the import cs1000 data. then hit convert and import and it fails? If I take the xml file that it...

Part and Inventory Search

Back
Top