Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. harogie

    Outgoing External Trunk Calls Not Possible in a Peer to Peer SIP Trunk between NSX1000 and UCM 6202

    We provided an alternative solution for the time being because our client became impatient. So what I did was create another SIP account on the user's phone but this time around, Panasonic SIP extension on the existing Grandstream SIP extension. So, all the user does is to access the trunk on...
  2. harogie

    Outgoing External Trunk Calls Not Possible in a Peer to Peer SIP Trunk between NSX1000 and UCM 6202

    I think they are the same, 35060. Like I mentioned before, extensions of both the Panasonic and UCM can communicate perfectly. The only challenge is for the UCM extensions to have access to the trunk lines of the Panasonic. I noticed that once the trunk call is initiated, it is routed to a...
  3. harogie

    Outgoing External Trunk Calls Not Possible in a Peer to Peer SIP Trunk between NSX1000 and UCM 6202

    Thanks, Omonat. I could that and confirm but they intend to increase the number of CO trunks on the Panasonic. So what would I do with this development? Presently, I created a Panasonic SIP extension (2113) as a second SIP account on the UCM extension user (2013). With this 2013 I could easily...
  4. harogie

    Grandstream UCM 6202 users unable to make outgoing external calls through remote Panasonic NSX1000

    Hello everyone, I have a Peer to Peer SIP Trunk connection successfully established between Panasonic KX-NSX1000 and Grandstream UCM 6202. Extension calls from both sides are perfect. Panasonic KX-NSX1000 has a GSM to VoIP gateway device. On the Panasonic KX-NSX1000, extensions with the...
  5. harogie

    Outgoing External Trunk Calls Not Possible in a Peer to Peer SIP Trunk between NSX1000 and UCM 6202

    Hello everyone, I have a Peer to Peer SIP Trunk connection successfully established between Panasonic KX-NSX1000 and Grandstream UCM 6202. Extension calls from both sides are perfect. Panasonic KX-NSX1000 has a GSM to VoIP gateway device On the Panasonic KX-NSX1000, extensions with the...
  6. harogie

    Interconnection between Cisco Router and Panasonic KX-TDA via PRI/E1

    Hi folks, Thought I should just mention here that, fortunately for me, the issue was eventually resolved (just in case someone finds himself/herself in the situation I also found myself). See settings belo: Configuration => Slot => PRI Card => Port Property => Main => Port Type: QSIG-Slave...
  7. harogie

    Interconnection between Cisco Router and Panasonic KX-TDA via PRI/E1

    Thanks Omonat, I have used the 8+TG number (e.g. 830), used TIE line access prefix (i.e. 7), leading digits in the TIE table (i.e. 2 and 3) but still hasn't worked. Not sure if the Cisco engineer has some more configurations to do or tidy up or am the one missing out on something..... I did run...
  8. harogie

    Interconnection between Cisco Router and Panasonic KX-TDA via PRI/E1

    Hello Folks, I have successfully integrated a Panasonic KX-TDA100D to a Cisco Router via a PRI/E1 card. Challenge is Cisco users can reach any extension of choice on the Panasonic PABX but users on the cannot do likewise. Any support would be highly appreciated. Thanks Harogie

Part and Inventory Search

Back
Top