Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CP400T kérdés

K

kepict

Systems Engineer
Feb 1, 2025
4
Hi everyone,

I am using a CP400T device on OS4K V11. I would like to disable the user from being able to set up call forwarding on the CP400T device. If possible, there should be no CFW menu on the device

I couldn't find an option for this in COS.

Any ideas?

Thanks in advance!
 
Sort by date Sort by votes
Call Forwarding to External Numbers or just Any Call Forwarding ?
 
Upvote 0 Downvote
Try to assign this CP400T subscriber to a DPLN group that does not contain any codes for CFW.
 
Upvote 0 Downvote
I remember this used to work on OPTISET and OptiPoint devices, but unfortunately does not work on OS4K V11 with CP400T.
I deleted all CFW from all WABE (as test), but the CFW service remained on menu of CP400T (and can be activated).
 
Upvote 0 Downvote
If I set DIGNODIS=Yes in SBCSU, then I can remove the FWD menu, but many other things also disappear (eg.: Callog) from menu of CP400T.
Of course, this is not a intended use...
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

M
  • Locked
  • Question
Openescape x8 with Openescape cp400t
Replies
3
Views
745
sbcsu
sbcsu

Part and Inventory Search

Sponsor

Back
Top