Recent content by zagi

Hallo! Anyone?

9620 and 9630 when connected to port set as trunk (Huawei switch) suddenly start to reboot (when handset is lift, and also in on hook state) – it takes some time and as it appears it disappears (most time is just fine :-). When 4600 model is connected on same port acts fine (no such behavior)...

Is it possible to manage to either or not to Tunneled H.245 massage in Q931? On status station/trunk state of this could be seen, but where/how it could be managed? Syste is CM 2.1 on S8700 with G650. Cheers! Zagi

Converting a SIP Set Back to H.323 I convert Avaya 4602sw phone from H.323 to SIP quite easily just following guide (it works good with Asterisk), but according to same document I could not succeed convert it back (from SIP to H.323). Telephone load and run upgrade file, 46xxsettins.txt file...

Still I have doubt regarding mentioned licence, because without it I could use L2TP tunel but having problem with IPSec. Best regards, Zagi

I do not have any such licenc, but whay you think that some is needed? In Help from Manager say: Encryption: Default = DES Select the encryption method used by the tunnel. The options are: DES CBC, 3DES or Any. Note: Use of 3DES requires entry of an IP Office licence. I try use just DES not...

What could cause same Shortcode not work when it is used in LCT but working when it is used as system Shortcode? Any ideas? Thanks! Zagi

I have problem with using tunneling type IP Sec (Encryption DES) for which, according to documentation additional licenses are not required. I am trying to connect two IP Offices 403 (R 2.1) using IP Sec (it is working with L2TP:-)). But after creating IP Sec section it does not show it in IP...

Hi, I have IPO 403 running 2.1(15) connected with Avaya S8300/G700 CM R1.3 by IP trunk. It is working fine (including FAX over IP :-)) except one thing... when it is used thought Least Cost Route. LCR is configured to use IP trunk for communication from IPO side to CM (main route), and...

Hi, I’m looking for some free or trial LDAP server for Windows to implementation with IP Office 2.1 Did somebody tried some and how it is working? Thanks a lot. Zagi

Hi, I need some tips regarding establishing SIP communication with Avaya CM S8300/G700. Is CCS needed or some other SIP server instead e.g. MS Live Communications Server could be used. What should be administrated on CM side? Thanks a lot. Zagi

Looks like I facing same problem as you. I put it on tek-tips, but I did not get any helpful replay. Let mi repeat myself: «We have following environment. Avaya Media Server S8300 with Media Gateway G700 (Call manager SW 1.3)at one side, and on other side IP Office 403 (SW 2.0.16). Between S&G...

Fax and modem connection using IP trunk Who have some experience with sending fax and establishing modem connection using IP trunk? We have following environment. Avaya Media Server S8300 with Media Gateway G700 (SW 1.3), and on other side IP Office 403 (SW 2.0.16). They are connected to...

Fax and modem connection using IP trunk Who have some experience with sending fax and establishing modem connection using IP trunk? We have following environment. Avaya Media Server S8300 with Media Gateway G700 (SW 1.3), and on other side IP Office 403 (SW 2.0.16). They are connected to...

Looks like I need napremis.bin file for rebooting after erasing operational sw. Thanks in advance.