Recent content by ZachBenj

I have a Sunblade 1000 that another dept is no longer using and nobody has a password for it. I have downloaded OPen solaris for SPARc and burned the image to a CD. How to I get the server to boot from CD? Any info wold be appreciated. thanks, Scott stomlin@aollc.com My suggestions are what...

Does the 8648GBRS SFP Fiber blade work on 4.1 code? I am also looking to take my 8600's to R-Mode. I am going to need to use CWDM modules to connect to a chassis 11miles a way. I will need 2 per chassis. Should I get all the same frequency for all connections or should I get 4 pair of...

I was setting up a suse 10 sp2 server and now all the letters appear as square boxes. This only affects the graphical screens. It will boot ok to a terminal prompt. Is there a way to set the graphics setting from a linux prompt? I am running the gnome desktop. anybody have any suggestions...

Thanks for the responce. From the responces I a receiving it sounds like it may work but it is not a good idea. I relayed this to the folks that wanted the packet capture and they decided to wait. My suggestions are what I would try myself. If incorrect, I welcome corrections to my...

Most of my switches are Nortel. I have a Cisco switch that someone wants me to Sniff on. The only ports available are GBIC ports. Can I use a Nortel GBIC in a Cisco switch? My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott...

How do you assign the WEP key to another Key index on a MAC? My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org

Can I copy a Nortel VPN CLient profile from one machine to another? Scott My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org

Sounds like you need to setup a DHCP relay on that VLAN. My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org

You set the "Allow password storage on client" under IPSEC of that particular group. Once the NORTEL VPN client logs in the setting will be pushed to the client. Yes, the NORTEL client must login to the contivity before the setting is set on the user side. This feature only works w/ the NORTEL...

We run 10 8600's through out our enterprise and we love them all. We run what Split MLT to 450 stack which our servers our plugged into. I think in Cisco terms the MLT is called ether channel. A Split MLT is done between 2 8600's to a device. For us the device is a stack of switches that...

The stateful firewall does a deny all by default. You will have to set up the ports on the fire wall to allow the VPN client through. My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org

Has anybody setup any filters on the 8600 to stop some of these new virus goig around? If you have will you please share what you filtered on. My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org

In a 450 stack of 3, if you want to replace 1, do you have to power down the whole stack or just the one that is going to be replaced? Scott My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org

You should be able to save the config to stanby NVRAM (not PCMCIA card) by typing "save standby" Hope this is what you are looking for. Scott My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org

Sorry, Have you tried forcing the ports on the switch to match the ports on the IBM and setting an MLT that is set to Access instead if tagging. My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge. Scott stomlin@baptistfirst.org