Recent content by zaaz0za

Pepperz, thanks that tool works good.....

I’ve needed the same thing on PRI’s(not ISDN)off of a 5ESS and a DMS100 and my carrier made the changes.

What size APC UPS would you recommend for the IP406 with 2 X 30 port digital modules? Thanks for your time…..

FYI on my 4612 IP phones I can change the internal ring pattern from the set by pressing the Conf button, each time you press it plays a different pattern.

Rebooting the system (IP406) fixed the problem. Thanks…..

I have a 406 v1.4(22), the digital phones work ok and the IP phones (4612) work, you can call in and dial out but we no longer get any dial tone on the IP phones rebooting the phones doesn’t help any ideas? Thanks for your time…..

I have a 406 v1.4(22) with one PRI, at times all channels are busy but I don’t know how often, I would like to track utilization so I can justify adding a second PRI. What tools would be useful? Could the info be extracted from SysMonitor ? Thanks for your time…..

This may seem obvious but if the non-Avaya DHCP is passing a router (default gateway) address this will override the IP of the call server/router (IP4xx) that’s manually set in the phone itself. If a phone acquires a IP, downloads the .scr form the TFTP, loads the file, asks for the ext and...

I have a IP406 v1.4(22) and I have 15 4612 IP phones running on a isolated subnet (not mixing voice and data) all phones have there own switch port 100MB HD. And ping times are about 1ms from the IP406 to the phones. All are set to G.711 Ulaw 64K, with fast start, out of band DTMF and allow...

That sucks, but thanks a lot for help...

Hi, I’m trying to transfer a call to a Hunt Group that is set up as “group” ring and have all the members in the extension list set up to dial/transfer/forward to outside cell phones at the same time, so the first cell phone that answers gets the call. If I only put one ext in the Hunt Group...

About every 6-8 weeks our IP406 1.4.(22) system stops working, you can call internal ext to ext and check VM but can’t dial out or dial in to a DID or the main # (auto attendant) you get a fast busy. I call in a trouble ticket on the PRI and they always say its ok, they then loop it up and test...

Fixed, the user had installed a shareware firewall/VPN software and had some TCP/UDP ports shut off.

I wonder if you could use the edit play list in VM Pro for your group VM, Hummmm you still have to get the Voice mail to play so it can become the .wav in the edit play list that’s forwarded to a generic action that has all the ext’s. Sorry I’m just thinking out loud If I think of anything I’ll...

VanZend, if I understand you correctly, the problem is the call doesn’t stay in the Queue but times out and goes to message, and you want it to stay in the queue? I have a similar setup I added a start point “queued” it goes to Transfer and its entry prompt plays my 1st Q message its specific...