Recent content by youngmelodie

Any one have an idea on what an amber light on the SSC card means. I only have a main and a secondary cabinet and no cable between them but yet I have an amber light on both SSC cards. Shouldn't it be red since they have no connection to each other??

Does anyone know if there is a way to display the full number of the set to the end user. With the older sets we used desi lables under the handset. So if someone new was to use the phone they could give out the call back number. Currently it only shows the DN of the set. Thanks in advance.

Yes it clocks off the PBX try reseating the card. Works for me. I have 15 of them. and some of the older ones have senior moments.

What rls are you using????

BUILD AN ACD AND POINT IT TO CP SDN NUMBER. SDN NUMBER IS THE NUMBER SOMEONE CALLS TO RETRIEVE VOICE MAIL. THIS SHOULD DO THE TRICK.

THANK YOU ALL FOR YOUR TIME ON THIS ISSUE !!!! We use 8 for Ac 1 which was part of the issue. As Joan does not state the subscriber for mailbox 5524012, which in the past would let you know what input was needed. The trunks are passing on the 8 but she does not tell you. Any way add 85524012...

Thanks for taking the time to respond. Both sets at each site have the cfw external allowed as he also forwards sometimes to his cell. As for the extention DN 5526701 is what is programed. When CP plays its' recording, plays the subscriber at 5526107 does not subscripe. I MM this is what we...

The phone number is already defined when transfered to the call pilot plays there is no scriber. Anywhere else to look or should I open a case ???? Thanks

I am trying to add a networked extention from one site to another. Example GO site 552-6701 to voice mail box JB 694-4012. The phone from GO is call forward to JB site. When some one calls GO and is forward to JB if the user does not answer goes to voice mail. Only it tells the caller that...

What do you want the acd to do ??? Go to vm or another phone another site ????

Try cls clba this should do the trick

stat the card and make sure it is enabled. LD 20 STAT X IF DISABLED LD 20 >ENLC X THEN STAT AGAIN, If this does not work disable card, remove the card count to 1o reseat the card. Hopefully it will come up for you.

LD 22 PRT PHST OR AHST

LD 15 CHG RDR CFN0 CFN1 CFN2

Yes there is a RlS 4.2 and I belive there is another one comming out. I have 16 MICB cards and several different Rls. By the way the changed the name starting on rls 3.11 they are now ICB