Recent content by YewNork

Hi, if your IPSI is connected to the main site, <I.E. it's not in ESS mode>, you will need to update it from the main site... LDS (TELUS)

Thanks for the reply Ken, <Did this system ever have a drive 1 or has it always been a 1 drive system?> It's been 2 drives up until a power outage. The original intent was to replace drive 1 At one time they had systems that you could only have one drive in and this may be one of them. <If you...

Thanx, but I have tried another drive with the same result. BTW, I can enable both drives in another system. I'm suspecting problems on the currently working drive 0. Thoughts? LDS (TELUS)

Hi all, getting the following error(s) when I try to add a drive 1: Enter drive to be installed[0-5]: 1 Drive Serial No: JLxxxxx Is this the correct drive? (y/n): y Installing System drive 1. Please wait... Error Code File Number Record 8e 32...

- status link 1 (if it's a clan integration) from the pbx LDS (TELUS)

Should point out (confess [purpleface])that there are a total of 343 announcements on the board. Most are as 602-3097 - all zeros. The exceptions are listed. Also, the gateway is not yet fully turned up - used for trunks only at the moment, therefore the activity is not near as high as it will...

Hi & thanks for the reply. The announcement ext is 6602070. The internal number doesn't show anything. Here's what comes back... display announcement 107 "107" Extension invalid; please check dialplan display announcement 6632070 ANNOUNCEMENTS/AUDIO SOURCES Extension...

Hi all, I think I have a problem with VVal. There is a .wav file in the board. 'list directory board 3v9' shows a filename & size, but 'list integrated 3v9' shows the same filename (-.wav) BUT 0 size! A 'list trace' shows the announcement being played from another location. list directory...

Thanx Ken, I do & have used it. I was hoping for something to tell the on-site person. Thanks again. LDS (TELUS)

That's what it does... If you are calling from the extension w / the MB, just hit # (end-of-dial). You should get asked for the Password. LDS (TELUS)

Hi all, Is there a report or other means to determine which attendant schedule is used by MailBox? I believe I have unused attendant schedules, but I'd like to be sure. Thanx LDS (TELUS)

Thanx dwalin, that did it. But why? The target station has no coverage path... Thanx again. LDS (TELUS)

Hello all, The Customer is a care home. Residents have a phone with a speed call button for emergencies. The emergency button is a vdn. An announcement indicates "for emergencies press 0". At night the call is routed to an extension (analog cordless with call waiting allowed. If the extension is...

Hi, additional info If I change the coverage path so that all outside calls go to coverage, the call will cover. It's just when it's set to go after 3 rings that it refuses to cover. List trace shows it as a trunk call. ??? LDS (TELUS)

Hello all, G3V8; Trunk call is routed to vector, "Press 1 if you know the ext" Route to digits with coverage "y" If the caller presses 0, & asks the attd for an ext, the unanswered call covers to VM If the caller presses 1 + ext, the call will ring forever at the local (no coverage). Any...