Recent content by yanios

We have a KX-TVA50 system and need to analyze outgoing calls on each phone line to see if we can omit a few lines in hunt group. The reports don't have a report to log outgoing calls. Any suggestions would be helpful. (am new at this:) Thank you.

Silverblade: Thank you for the link Already checked there and am still reading all that they have.

We installed 3 cisco sge2000 switches in a school. We just plugged them in so they should be acting as hubs. How can I find out the ip or mac address so as to begin to configure as switches? Thank you, NewToThis

dberg35: Thank you for your help! I went back to my boss and ran it by him. Now,the change of plans are to have everyone on 1 network - the win2003 server using ip 10.1.1.x. That makes sense to me since we have 40+ users in the school and only 8 in the admin bldg. and we have a 'home run'...

Hi: I'm hoping to get some direction on connecting 2 networks. I have a school with 30 users on a Win 2003 server & IP 10.1.1.x and an Admin bldg with 12 users running Win XP server on IP 192.168.1.x. Each have their own verizon switch to get to the internet. The school win2003 server gives out...

Can I upgrade/move from xp home to xp pro without having to reinstall all the applicaitons or doing a format of the hard drive and start from stratch? thank you.

Burgebees: Yes, both servers are located in 2 different buildings. Once in school using 10.1.10.x and the other in the Office building using 192.168.1.x. I need to get a pc onto the Office bldg segment 192.168.1.x and off of 10.1.10.x. Internet access is by a Verizon switch (Actiontec). Hope...

I have 2 servers (win xp pro and win 2003). I need to move a pc from the win2003 server to the win xp pro server and have the pc look at the shared folders. I have changed the workgroup from Student to Office, the IP address from 10.1.10.x to 192.168.1.x. I can see the pc's and shared docs but...

Thank you all for your input. I will check out the 2900.

NickFerrar: Thanks for the reply I need to keep the cost at $2700 and I was looking at the Duo Core Xeon3050 2.13ghz processor w/ 2gb ram, SAS5iR internal RAID controller for a Raid 1, (2)160gb hard drives, no tape drive (tape drive comes in at $800+ so I need to use an existing tape drive for...

akwong: Thanks for the reply. The Dell840 will be used as a file server with 1 main datbase and 1 small ms access database; the computer lab will have student folders on it that will be mostly ms word w/ graphics,excel spreadsheets & very small databases in access. The max users will be 50...

I'd like to get a 2nd opinion on a server configuration. Dell recommended a PowerEdge 840 server to hand a max of 50 users. 5 are staff in the office, 25 are students in a lab and 5 more are teachers with desktops in there rooms. Server will run Windows 2000 server. Is this big enough to...

Thank you iolair and Novelli: I tried http://ip address and it still failed. I check TID's 10065902, 10077029, 10078877, 10077480 and a few others but to no avail. I ran PKIDIAG and everything checks out ok. Does anyone know how I can get around not using Imanager? In Imanger I setup 3...

IManager was running fine until I rebooted the server then opps it disappears. I had it bookmakred on 2 different PC's and both worked well until the reboot. I get a message "page can not be found" when trying to call up Imanager using https://server ip address:2200. Nothing was changed on the...

LB, Thank you. It worked but gave me totals at the end of the report. The @accum formula gave me running totals if placed in the Details & in group header/footer. I changed the @accum to @countdisplay WhilePrintingREcords; NumberVar Counter; This gave me a record count by dept. Then I...