Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by WooHooJonesey

  1. WooHooJonesey

    More ARS trouble

    Are you using Sip trunks? if you are, try adding a # to the end of the dialled number. For the analogue trunks you could also try going to Lines, Analogue options tab, then at trunk type, make sure the are set as loop start ICLID. try setting the truck just to loop start. This will require a...
  2. WooHooJonesey

    Remote access without modem

    WooHoo!! Thank you for posting those ports, works a treat. Now got to get all my customers to let me on their routers
  3. WooHooJonesey

    Index System

    Hi if you can log on to the system. 1 go to automatic route (12 or 14) 2 go to 6 Translation create a new translation lets say 50 replace string (ddi) ie:654321 to (0779865432 The divert number) escape go to String Analysis locate ddi number (654321) change translation 50 If you have done...
  4. WooHooJonesey

    Access personal Vmail remotly using the DID number of an extension

    If he is calling in from his mobile,.... Then create a ddi and point this straight to voicemail Then in his user source numbers add his mobile number with a v in front ie: v079865432233 the voicemail will recognise his mobile (cell phone if in usa) and take his call straight to his mail box. I...
  5. WooHooJonesey

    Phone Manager Pro

    Yes. I know that as well :D
  6. WooHooJonesey

    IP Office SIP Trunk unregister issue after sometime of registration

    Find out if the router is using NAT. There will probably will a timer that will drop the sip connection if no activity after 60 seconds. I had the same problem on a customers Cisco router. Find out from the sip provider if Re-Invite is Supported.
  7. WooHooJonesey

    CPU-X Faults

    Hi. I just got this from the INDeX tool kit Checking the CPU The CPU cassette performs an automatic self-test when power to the Control Cabinet is switched on. The status lamps on the front of the cassette indicate the result of the self-test. To check the CPU Cassette : 1. Check the status...
  8. WooHooJonesey

    Short Code question

    You also want to put the whole name and number in the directory so it displays their name on incoming calls but you knew that.
  9. WooHooJonesey

    Clarification on UMS IMAP vs Exchange 2007 IPO R7

    I am glad you have posted this. I have one on Friday to go and install but they will Exchange 2010. dose anyone know if it is the same setup as Exchange 2007? Fanks
See more

Part and Inventory Search

Back
Top