Recent content by Williamc1977

In regard to above reply.. You can only see that drive itself and not the data thats on that drive...

You can see it on your PC but you need to know where to look. Have you tried going into, control pannel > Administrative Tools > Computer Management > Disk Management ?? you should be able to see that drive in there, As it can see the linux partition that i have, But you can not format it...

Hi there Is there a way of getting the configuration of a server while its still up and running ? I'm a hardware engineer and I need to do an audit of over 100 xseries and i dont want to take of the cover and check the part numbers.. All i need to know is the speed of the CPU, Memory config...

Hi Guys I'm having trouble getting HP9000 Server manuals. Been on the HP site but i can't seem to download them. Any1 knows where else to get them from ? And also are HP having trouble with there site ? I cant even log into my itrc support for a long time and when i connect to it using...

It would not be the system alarm thats going off. It would not come on if you start your system as the would not get that hot straight away. I had this problem b4 and it was one of my hard drive that was making the noise. (believe it or not but it was).. 1 of my hard drive was failing and it was...

For some1 thats new to networking the best bet to see if your other network card is faulty is by sharing hdisk for both computer and see can you see each other hdisk on my network place, If you dont see each other disk make sure that both your networkgroup are set the same, All my computer in my...

The best choice would be the modem/router, can get one really cheap these days and you also need two cat 5 network cable. Under winXp you can create a network easily which will allow both the computer and laptop to go online together or seperately.

On some monitor If you take of the back cover of it you should see some nobs thats you cant twist that will brighten/contrast the screen. Also some graphic card drivers will let you brighten up the screen (ATI drivers will let you do that but dont know about other makes)

To create a bootable hdisk all you need is to format it and make it bootable by Format c: /s This will make your hdisk bootable But if you want to make a fresh install of O/S all you need is to put the window disk into the cd-rom and it will bootup and install it onto that new hdisk which...

recently at work we purchase a few of these machine to test. As usual i use the standalone diag cd. But after the machine been booted up on the screen, the terminal ibm3151 seem like it frooze and the diag screen doesnt show up. To get around this i've installed AIX 5.1 onto the hard drive, Can...