Recent content by westcoaster

IP Office Web Manager with the port of :7070 Click the drop down under "Applications" Select Voicemail Pro - System Preferences The Web page loads, I am able to click "Enable Voicemail Pro Client Interface" to yes and click "Update" A Popup then confirms the change (Yes) Saving... Then a red...

Outgoing calls placed on SIP trunks disconnect at fifteen minutes and thirty six seconds. Pick up a shoretel IP480G set and dial a telephone number. At the 15:36 mark, the far end drops but the trunk test tool and communicator (I have not looked at the icon on the telephone set yet) show the...

Performed a restart on the system today. No change. Still get a bug error on PRI setup and teardown of a call.

I sure would appreciate it.... I have a google mail account. westcoasterz is the handle.

This is on a Linux cppm 6.0 system. Tried to find the exterminator bug decoder, but that doesn't seem to be around any longer.

New Information: I call the main pilot number and get the following two BUG1500 outputs. BUG1500 BUG1500 : 053A1E02 0000000B 0737986B 00000600 00000218 00001504 0000002A 0 0000 0000 00000000 00000000 0 5700 00000084 0000AA87 00000000 00000000 00000000 00000 000 00000000 BUG1500 + 307E36FA...

Hi, Have a problem, users complaining conference calls getting cut off. I log into the switch and find these bug errors. While they are not coming fast and furious, they are at a steady pace. BUG1500 Parameters to NUM_DN_MEMBERS do not identify a valid SL-1 DNBLOCK. Procedure NUM_DN_MEMBERS...

update: Yes, turning on the extended memory test did solve the immediate problem and get the server to boot "properly" The fix was to follow the documentation. Load opimal settings and then make the proper changes. Those changes did not include enabling the extended memory test.

Changing the bois setting to run the extended memory test appears to have resolved the issue. Shut down and restarted several times to have it boot normal every time. Still havent located in the documentation where it says what the extended memory test should be set at. For the heck of it I set...

Under "BOOT" Extended Memory Test is disabled Options are: 1 Mb 1 Kb Every Location Disabled This isn't mentioned in the documentation you pointed out. I will go through it in more detail tomorrow. I wouldn't be surprised if all the default BIOS settings are off since I did locate at least...

Yes, performed the config wizard immediatly after loading the patches and did it again today just for giggles. This only appears to happen when the server does an automatic cold start. A cold start where I press the power button works great. A warm restart works great.

CallPilot 600R 5.0 patched with SU11 etc. So I have just spent a couple hours in the lab trying to figure this thing out. It used to be when power is applied to a CallPilot 600R server it would automatically power up and start. All services would load and the CallPilot would start processing...

I had a similar situation a short while ago... Turned out it was the universal trunk card in the Opt 11. (analogue lines) It wasn't passing/processing DTMF tones. A reseat of the card did not solve the problem. As an interm fix the trunk was moved to another TN and the faulty TN was flagged.

This is now seriously starting to pizzle me off..... Enabled NARS/BARS on the system, tried every tag available in ld 86 digit manipulation (taged as ukwn, intl, spn, npa, nxx, etc...) including inserting 011 and or deleting the leading three digits. Results vary depending on the tag. NCHG...

Thanks for the replys I have looked in Ld 49 and there is nothing programmed for allow/deny I'm thinking this will need to have nars/bars programmed if for no other reason than the flexability nars/bars provides.